Manual Alecto FR-70 (page 8 of 12) (English, German, Dutch, French, Portuguese, Spanish)

708507

Zoom out

Zoom in

1/12

SETTINGS

CHANGING THE SEND/RECEIVE CHANNEL:

1. press 1x the button, the channel indica-

tion will start flashing

2. press the or button to select your

desired channel

3. press the PTT button to confirm

CHANGING THE SUB-CHANNEL (CTCSS):

1. press 2x the button, the sub-channel

indication will start flashing

2. use the or button to set your desired

sub-channel (1-38) or to turn this function off

by choosing sub-channel 0

3. press the PTT button to confirm

Keep in mind that the handset of the person

talking with you must be set to the same sub-

channel.

CTCSS CODE

CTCSS (Continuous Tone Controlled Squelch

System) is a tone code sent when transmitting

and cannot be heard.

The receiver will only reproduce the signal if the

tone code of the transmitting radiophone match-

es the tone code of the receiving radiophone.

To prevent being disturbed by the signals of

other PMR-446 radiophones communicating on

the same channel.

CHANGING THE CALL TONE:

You can choose from 5 tones and ‘tone off’:

1. press 4x the button, ‘1

’ will start flash-

ing in the display

2. use the or button to change the call

tone, the speaker will play the selected tone

(‘OF’ = tone off’)

3. press the PTT button to confirm

If choosing the ‘OF’ option, you can still send a

call tone (tone 1), but it will not sound through

the speaker of your own walkie-talkie.

CALL VIBRATION ALARM:

The FR-70 also offers a vibration alarm:

1. press 5x the button, ‘oN’ or ‘oF’ will

start flashing in the display. The ‘ ’ icon will

appear in the display.

2. use the and buttons to adjust the

alarm, the FR-70 will vibrate to confirm

(‘OF’ = vibration alarm off’)

3. press the PTT button to confirm

KEYPAD LOCK:

By activating the keypad lock, the ,

and

buttons will be blocked.

1. press and hold the button for 2 seconds

until ‘ ’ appears in the display

2. press and hold the button again for

2 seconds to unlock the keypad

USER TIPS

GENERAL:

The FR-70 is a transmitter/receiver working with

radio waves on the 446 MHz band. Its signal

transmission can be affected by external influ-

ences such as other radiophones, transmitters,

wireless phones, etc. When your radiophone

is being interfered with or causes interference,

simply changing the channel usually solves this

problem.

The use of this radiophone is permitted in all

the countries of the EU. If you want to bring the

FR-70 to countries outside the EU, you should

consult the local restrictions on the use of

PMR446 equipment.

Don’t forget that the signal of the FR-70 can

also be heard by radiophones or receivers other

than yours.

It is in no way allowed to make any changes

to the electronics or the antenna of the FR-70.

Service must be performed by qualified service

personnel only.

Never use the FR-70 outdoors during thunder-

storms.

POWER SUPPLY:

The battery symbol on the display shows the

current charge of the installed batteries:

batteries full

batteries 1/3 full, please recharge or

replace immediately

Only recharge the supplied battery packs by

placing the FR-70 onto the supplied charger.

Don’t forget to turn off the walkie-talkie before

placing it in the charger.

Individual rechargeable batteries must be

charged in a separate charger.

Never try to recharge non-rechargeable batteries.

RADIO CONNECTION:

The FR-70 has an effective range from up

to 7Km. This range can be affected by local

conditions such as high buildings, high voltage

posts and overhead wires. An optimal range is

achieved when the radiophone has a clear sight

of the receiver.

CTCSS:

A handset without CTCSS code setting can

receive the signals from all handset transmitting

on the same channel. You can only talk back

when you set up the same CTCSS code as the

other handset.

MAINTENANCE:

- Only clean the FR-70 with a moist cloth.

- Never place the radiophone in direct sunlight

or humid environments.

- Prevent water and/or sand from penetrating

the FR-70.

- In case of any problems, always check first

whether the FR-70 does work correctly on a

different location.

ENVIRONMENT:

- When discarding your radiophone, please

return it to your dealer. They can guarantee

environment-friendly disposal.

- You can return exhausted batteries to the

dealer of these radiophones or to your local

collection point for small chemical

waste.

- Never dispose of empty or exhausted

batteries as normal domestic waste.

TECHNICAL SPECIFICATIONS

Operating frequency: 446.00625 MHz up to

446.09375 MHz

Channel spacing: 12.5 KHz

Output: < 27dBm

Power supply batteries 4 x rechargeable

radiophone: 1.2Volt, size AAA

Power supply charger: 9V / DC / 300mA via adapter

Headset connection: 2.5mm stereo

Range: up to 7Km

Period of use: transmitting: 2.5 hours

stand-by: 2 days

Weight radiophone: 160 g (Incl. batteries)

Dimensions: 120(170) x 50 x 30mm

Conform: 2014/53/EU

Declaration of Conformity

http://DOC.hesdo.com/FR-70-DOC.pdf

TROUBLESHOOTING

No function:

- the batteries are empty, please charge or replace

Weak or no reception:

- the batteries are empty, please charge or replace

- incorrect setting of channel or sub-channel (the

transmitter and receiver must be set to the same

channel, this also applies to sub-channels)

- the distance between the transmitter and receiver

is too large, please reduce the distance

Noise:

- presence of other transmitter, please change the

channel

- interference from other devices, turn these devices

off (if possible)

High whistle:

- the transmitter is too close to the receiver of the

volume of the receiver is set too high, please

increase the distance or decrease the volume

If you cannot resolve the issue with the above

suggestions, please remove the batteries from the

handset and reinstall after several minutes. If this

still doesn’t resolve the issue, please contact www.

alecto.nl.

WARRANTY

This ALECTO FR-70 is covered by a warranty

of 24 months commencing on the day of your

purchase. During this period we guarantee that

any defects caused by errors in materials or

construction will be repaired free of charge. The

importer decides upon these conditions.

WHAT TO DO:

If you note any anomalies, first read the user’s

manual. If you cannot find any solution to your

problem, contact your retail or www.alecto.nl.

WARRANTY COVERAGE TERMINATES:

In the event of misuse, improper connection,

battery leakage or incorrect placement of batter-

ies. It does not cover the use of parts or acces-

sories not delivered with this device, neglect

or any failure caused by humidity, fire, flood,

lightning or any natural disaster. The warranty

does not cover alteration or modifications of the

product by unauthorized qualified service per-

sonal. The warranty terminates in the event of

incorrect transportation of the equipment without

appropriate packaging or if the equipment is

not accompanied by this warranty card and the

receipt of purchase.

Cables, jacks and batteries are not covered by

the warranty.

Alecto will not be held responsible for indirect,

consequential or special damages.

Name: Attach here

Address: your receipt

Post code: or voucher

City:

Tel:

ver1.1

Service

Help

Service Help

WWW.ALECTO.NL

SERVICE@ALECTO.NL

Hesdo, Australiëlaan 1

5232 BB, ‘s-Hertogenbosch

The Netherlands

WWW.ALECTO.NL

SERVICE@ALECTO.NL

Hesdo, Australiëlaan 1, 5232 BB,

‘s-Hertogenbosch,

The Netherlands

v3.0

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alecto FR-70 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 3,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alecto FR-70

Alecto FR-70 User Manual - Dutch - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alecto FR-70 Manual

Product: