668917

Alecto DVM-700 Manual

44
Zoom out
Zoom in
Previous page
1/52
Next page
44
2
1
• This ‘Cry Alert’ warning consists of a warning in the display and you may also
set the following (see the tab ‘Cry Alerts’):
1. Beep & Vibrate: beep tone + vibration
as an extra warning
Vibrate: only vibration as an extra
warning
Beep: only a beep tone as an extra
warning
Screen only: only a warning in the
display
2. This setting has no function
• example of a warning when the baby is crying:
- the alert stops automatically after 30
seconds or you may press ‘Dismiss’ to stop
the alert beforehand
- touch ‘Settings’ to open the menu directly
and then set the alarm
To set the level at which the video and audio of the receiver are enabled again, go
to the tab Menu – Cry Alerts – VOX Sensitivity.
Off: VOX disabled, video and audio are transmitted continuously
Low: low sensitivity, the bay must be crying loudly before the receiver is switched on
Mid: average sensitivity, the receiver is switched on when they baby is crying
normally
High: high sensitivity, the receiver is switched on even when the baby is crying softly
4.6 SYSTEEM SETUP:
You may use the touch-screen of the parent unit to adjust the system settings of
the baby monitor.
1. touch the screen in a random spot, touch Menu and then touch Settings
1a 1b 1c
Cry alert: (VOX function)
You may continuously watch/listen to your baby or only when the baby is crying
as follows:
Watch/listen continuously:
1. touch the screen in a random spot, touch Menu and then touch Cry Alerts
2. now touch VOX sensitivity and select Off
Press the Home button to exit the menu and to return to the standard display. The
video and audio are now active at all times.
You can still enable or disable the video by pressing the Screen On/Off button
and you may adjust the volume level using the – Vol. + button
VOX controlled watching/listening:
1. touch the screen in a random spot, touch Menu and then touch Cry Alerts
2. now touch VOX sensitivity and select Low, Med or High
Press the Home button to exit the menu and to return to the standard display.
Operation:
• When the baby is sleeping quietly, the video and audio will be switched off
(you can always enable the video/audio by briefly pressing the Screen On/Off
button; the video and audio will be switched off again after several seconds)
• As soon as the baby starts crying, the video will be switched on. Provided the
volume isn’t set to level 0, the audio will be switched on as well so you can see
and hear your baby. After the baby goes back to sleep again, it’ll take 10 to 15
seconds until both video and audio switch off.
• If the volume is set to level 0 but the baby is making little noise, only the
display will switch on. If the baby is crying loudly (so loud that also the red
lights on the left side of the display are illuminated, see paragraph 2.4, item 7),
the display will switch on while you also get the ‘Cry Alert’ warning.
1a 1b 1c
1a 1b 1c
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto DVM-700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto DVM-700 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 13,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info