668917

Alecto DVM-700 Manual

40
Zoom out
Zoom in
Previous page
1/52
Next page
40
3.2 PARENT UNIT:
The Parent unit is not waterproof and thus only suitable for indoor use.
Power supply:
The parent unit may be powered directly by the supplied
rechargeable battery. This battery is already installed
during the manufacturing process. Pull the insulating strip
out of the parent unit to activate this battery.
This battery is recharged by connecting one
of the supplied power adaptors directly to the
parent unit.
Charging :
As soon as the power adaptor is connected to the unit and a 230V wall socket, the
battery will be charged.
• When using the unit for the first time, please charge the battery for at least 15
hours regardless of the indicator showing a fully charged battery.
• The charging circuit of the battery is controlled electronically. You may leave
the parent unit onto the charger or leave the adaptor connected at all times,
because there’s no risk of overload.
• However, when not using the set for a long period of time (>2 months), it’s
recommended to remove the adaptor from the wall socket and the battery from
the parent unit. When using the set again, you should first fully charge the
battery.
Table stand:
The rear of the parent unit is provided with a table stand. Unfold this stand to
place the parent unit on a table or cabinet.
Home
3 INSTALLATION
3.1 BABY UNIT: (CAMERA)
The baby unit is not waterproof and thus only suitable for indoor use.
Power adaptor:
1. Connect one of the supplied
power adaptors with the
input at the rear of the baby
unit.
2. Insert the adaptor into a 230V
wall socket.
Only use the supplied power adaptor.
Make sure the baby cannot touch the
cable. Place the baby unit at least 1 to 2
metres away from the baby and bundle excessive
cable length with tape or cable-ties available
specically for this purpose.
Table model or wall model:
You can place the baby unit on a table, cabinet or desk or you can mount it onto
a wall.
Wall-mounting:
Drill two holes in the wall, next to each other at a distance of 3.7 cm from each
other, and insert plugs and screws. Make sure to let the screws protrude for
several millimetres.
Suspend the baby unit by sliding the cut-outs in the camera support over the
screws and pressing the baby unit somewhat downward. Finally, neatly tuck away
the adaptor cable with cable-ties.
Placement tips:
• When used as a baby phone: place the baby unit at least 1-2 metres away
from your baby and make sure to safely tuck away the adaptor cable.
• It’s recommended to place the baby unit as high as possible and away from
large metal surfaces; this ensures an optimal range.
• Don’t connect the adaptor cable at the rear too tight. Allow for sufficient cable
length to ensure that the camera won’t be impeded when moving.
1-2 meter
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto DVM-700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto DVM-700 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 13,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info