803226
48
Zoom out
Zoom in
Previous page
1/56
Next page
48
Night light:
1. Press and hold the button to open the menu, now release this button.
2. Repeatedly press the button until appears on the display, followed by
ON or OFF.
3. Press the button or to switch the night light on (‘ ON’) or off (‘ OFF’).
4. Shortly press the button to save the setting and to close the menu.
Brightness:
1. Press and hold the button to open the menu, now release this button.
2. The symbol will on the display, followed by the current setting.
3. Press the button or to set the brightness from low intensity ( ) to
high intensity ( ).
4. Shortly press the button to save the setting and to close the menu.
Don’t forget that a high intensity uses more power. When using the parent unit
with the built-in battery, please select a low intensity to prolong the battery’s life
span.
Temperature indication and warning:
The temperature of the room with the baby unit is shown above in the display of
the parent unit. You can select to show the temperature in degrees Fahrenheit or
in degrees Celsius. Besides that, you can let the unit sound an alarm tone when
the temperature in the baby room becomes too high or too low.
1. Press and hold the button to open the menu, now release this button.
2. Repeatedly press the button until ‘ ’ appears on the display, followed by °C
or °F.
3. Press the button or to switch between °C and °F.
4. Shortly press the button , ‘Lo’ will appear followed by the lower threshold
value for the temperature alarm.
5. Use the button or to set the lower threshold value (or select OFF if you
prefer not to set a lower limit).
6. Shortly press the button , ‘Hi’ will appear followed by the upper threshold
value for the temperature alarm.
7. Use the button or to set the upper threshold value (or select OFF if you
prefer not to set a lower limit).
8. Shortly press the button to save the setting and to close the menu.
As soon as the temperature becomes too low or too high, the unit will now sound
short alarm tones while the temperature display will start ashing on the display.
Don’t forget that the temperature is only an indication and you must take into
account a possible deviation of + or - 2 degrees.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto DVM- 360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto DVM- 360 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info