668905
51
Zoom out
Zoom in
Previous page
1/60
Next page
- 51 -
6.0 STAND-ALONE INSTALLATION
The doorbell can also function outside an existing installation. Through the Alecto service department
you may order an extra separate wireless doorbell (DVC-25). The additional separate wireless doorbell is
inserted directly into a wall socket.
6.1 TO CONNECT THE DOORBELL PUSHER
The doorbell pusher should be connected to an external adaptor or doorbell transformer. The adaptor must
supply a minimum of 1 Amp while the voltage must range between 8 and 12 V. This may be either direct
current or alternating current.
Connect the doorbell pusher in the same way as is described in the paragraph 4.0 Installation.
The wires found at the old doorbell now serve for the adaptor or transformer. See below diagram:
Resistor
adaptor
or
transformer
12V~
12VDC
You may also place the transistor close to the adaptor or transformer.
6.2 TO CONNECT THE (EXTRA) DOORBELL
You may order a wireless doorbell via the service department of Alecto. This doorbell is also suitable as an
additional doorbell for an existing installation. When you’ve received the doorbell, it should be inserted into
a free wall socket.
Use the doorbell melody setting to select the desired melody (36 melodies).
Press the Setting button for the next melody.
Use the doorbell volume setting to adjust the volume in 4 increments or to turn the sound off. To do so,
repeatedly press the button.
To register the doorbell on the DVC-1000 doorbell pusher
1. press the button and keep it depressed
2. press the button of the DVC-1000 doorbell once and then release the
button of the extra doorbell
3. the wireless doorbell is now registered on the DVC-1000
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto DVC-1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto DVC-1000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 10,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info