668905
46
Zoom out
Zoom in
Previous page
1/60
Next page
- 46 -
2.0 Preparation before the installation
To have the doorbell camera work via the WIFI network and the associated APP on the phone or tablet, it
must rst be registered on the WIFI network.
1. Connect the supplied battery to the doorbell camera via the connector and then insert the battery into
the battery compartment.
2. Connect the doorbell camera to a doorbell transformer or a separate adaptor (i.e. power source) of 12
Volts and 1 Amp. The power supply may provide either direct current or alternating current, however
please use a power supply of at least 1A. Press the clip at the top of the terminal block and insert the
wires into the terminal block. Do not yet press the doorbell of the camera; otherwise you’ll cause a
short circuit in the power supply. The battery is now being charged.
UTP/LAN
connection
12v- or
12VDC
LAN
3. Connect the supplied separate UTP connection to the terminal block at the bottom of the doorbell
camera. Now use a UTP cable to connect the doorbell camera with the router used in your home.
Advice: Charge the battery for at least 12 hours.
4. Download the AlectoCam APP via the Play Store or App Store.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto DVC-1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto DVC-1000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 10,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info