589691
5
Zoom out
Zoom in
Previous page
1/8
Next page
Electronic Time Switch
Function:
Connect devices to the DTS-814 to
have them switch on and off automat-
ically.
The switching assignments are per-
formed to the exact minute.
Up to a maximum of 20 different
on and off switching times may be
programmed; these can be repeated
daily, weekly or for only part of the
week, according to your requirements.
A built-in rechargeable battery main-
tains the time and programming data
in case of a mains power outage and
allows you to program the switching
times with the timer disconnected
from the outlet.
Preparation:
1.
2.
3. Set the on/off switch of the device
or lamp you’ll be connecting to the
on position
To set the actual day and time:
Press and hold the CLOCK
button during the setup.
Repeatedly press the DAY
button (or briefly press and
hold) to set the day (*)
Repeatedly press the HOUR
button (or briefly press and
hold) to set the hours
Repeatedly press the MIN
button (or briefly press and
hold) to set the minutes
Finally release the CLOCK button
and the actual time and day are now
stored
*: MO = Monday
TU = Tuesday
WE = Wednesday
TH = Thursday
FR = Friday
SA = Saturday
SU = Sunday
DTS-814
Daylight saving time:
Press and hold the CLOCK
button for 3 seconds to set
the clock to summer time;
press and hold again for 3
seconds to set to winter time
Set to
summer time
To set the switching times:
Up to a maximum of 20 different
on and off switching times may be
programmed; these can be repeated
daily, weekly or on a combination of
days, according to your requirements.
Repeatedly press the SET
button to select your desired
programme step and to
determine whether this must
be a switch on time (ON) or
switch off time (OFF)
Repeatedly press the DAY
button to set the day or a
combination of days
Repeatedly press the HOUR
button (or briefly press and
hold) to set the hour
Repeatedly press the MIN
button (or briefly press and
hold) to set the minutes
Press the SET button to
program the following pro-
gramme step
or press the CLOCK button
to end the programming
process
To check & adjust the switching
times:
Repeatedly press the SET
button; the display shows all
programme steps one after
the other
To change:
Use the DAY, HOUR or MIN
button to adjust the selected
programme step
To remove:
Use the SET button to recall
the concerned programme
step in the display
Press the RECALL button to
delete this step; the display
now shows: --:--
To undo a deletion:
Use the SET button to recall
the concerned programme
step in the display
Press the RECALL button
and the switching assign-
ment will be active again
10hr
3 sec.
+/- 1 hour
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto DTS-814 - V1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto DTS-814 - V1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alecto DTS-814 - V1

Alecto DTS-814 - V1 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info