707245

Alecto DBX-68 Manual

42
Zoom out
Zoom in
Previous page
1/52
Next page
42
4 USE
Don’t forget that this baby intercom is merely an extra piece of mind. The
device can never replace the physical and monitoring presence of a parent
or babysitter.
4.1 TOUCH-SCREEN OPERATION:
Both the parent unit and baby unit are operated using the touch-screen. To
prevent functions from being switched on/off by accident, the user function
of the touch-screen is disabled in standby mode. Briefly press the button
to enable the user function of the screens, indicated by the illumination of
the backlighting.
Keep in mind that certain buttons must be pressed briefly while others must
be pressed longer. Please refer to the instructions in this user manual.
4.2 TURNING ON/OFF:
Press and hold the button for 3 seconds to turn on the baby-
unit or parent-unit.
Press and hold the button again for 3 seconds to turn off the
baby-unit or parent-unit.
4.3 CONNECTION CHECK:
As soon as you switch on the parent-unit, it will start searching for the baby-
unit.
If the parent-unit still hasn’t located the baby-unit after 60 seconds (because
it’s still turned off or out of range), the display lighting will start flashing while
the text ‘OUT OF RANGE’ appears in the display.
4.4 TO LISTEN:
Parent unit reception volume:
1. briefly press the button to activate the touch-screen
2. press to increase the volume
3. press to decrease the volume
• the DBX-68 has 8 volume levels and ‘sound off’
• an ‘x’ will appear behind the speaker symbol
when the volume is switched off
• the set volume level will be
shown of the display
Visual sound indicator:
The display indicates whether the baby is crying or not as
follows:
baby sleeping
baby crying
4.5 NIGHT LIGHT:
The baby-unit is provided with a built-in night light.
The light has the following possibilities:
1. briefly press the button to activate the touch-screen
2. press and hold the button for 1 second
• appears in the display = night light on
• appears in the display = night light in automatic mode
(on when the baby is crying, off when the baby is quiet)
• no light in the display = night light off
4.6 LULLABIES:
The DBX-68 is pre-programmed with 6 different lullabies and sounds that
you can set via the parent unit. After selecting your desired sound, it will be
played for up to 15 minutes.
1. briefly press the button to activate the touch-screen
2. press and hold the button for 1 second to start
playback
3. you can use the and buttons to select a different
song or sound
• playback will stop automatically after 15 minutes, you
can repeat instructions 1 and 2 above to stop playback
earlier
• use the and buttons on the baby unit to adjust the
volume
• the sound of the lullabies can be heard at the parent unit through the
microphone of the baby unit; you can decrease the volume of the parent
unit if this bothers you
1
2
3
1
2
1
2
3
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto DBX-68 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto DBX-68 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 16,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info