707244
54
Zoom out
Zoom in
Previous page
1/56
Next page
54
7 GENERAL INSTRUCTIONS AND TIPS
7.1 BATTERY CHECK:
The display of the parent unit will indicate the battery charge status of both
the parent unit and the baby unit.
battery indication baby unit
battery indication parent unit
battery full
battery 2/3 full
battery almost empty
parent unit: place it on the charger as soon
as possible to charge the battery. baby unit:
connect the adaptor or replace the batteries
(and flashing): battery is basically exhausted
and the unit can switch off any moment
As soon as the battery of the parent unit or baby unit becomes
exhausted, the symbol will flash in the display, the warning “WEAK
BATTERY” will appear and the unit will emit beep tones.
You can turn these beep tones off by briefly pressing the button.
When the baby unit is powered by the power adaptor, the
display will always indicate full batteries, whether batteries
are installed or not
The POWER indicator on the baby unit shows the battery status. As
long as this light remains lit, the batteries are OK. When this light
starts flashing, please replace the batteries or connect the adaptor.
The battery indication will scroll - - - while the
batteries of the parent unit are being charged.
7.2 BATTERY LIFE:
With a fully charged battery pack (parent unit) or with full batteries (baby
unit), the baby monitor can function for 12 to 20 hours.
The times mentioned above are references only and depend on settings
and use (a higher volume, the night light being switched, how often and
for how long the baby is crying, the quality of the batteries, etc.).
7.3 POWER SUPPLY:
Adaptors:
When using adaptors, only use the supplied adaptors. Connecting
power adaptors other than the supplied adaptors can cause damage to
the electronics of the baby intercom.
Batteries:
In the parent-unit, you may only install a RECHARGEABLE battery pack
of the type Lithium-Polymer, voltage 3.7V, power 720mAh.
In the baby-unit, you can install any normal or rechargeable batteries
of the type AAA or pencil cell. However, rechargeable batteries must be
charged using a separate battery charger.
7.4 APRS (variable transmission power):
The DBX-62 is provided with the APRS transmission system. This
Automatic Power Reduction System monitors the transmitting power
at which the parent unit and baby unit exchange signals, ensuring a
minimum in transmission power while maintaining a 100% reliable signal
transfer.
This means that the baby unit will never transmit with more power than
what is required for a good connection.
7.5 MAINTENANCE:
Only clean the baby monitor with a moist cloth; never use chemical
cleaners. Before any cleaning, you must disconnect the adapters.
Before cleaning, any connected power adaptors must be disconnected.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto DBX-63 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto DBX-63 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 16,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info