Manual Alecto DBX-63 (page 51 of 56) (English, German, Dutch, French)

707244

Zoom out

Zoom in

1/56

5.5 TEMPERATURE ALARM:

The display of the parent unit shows the temperature transmitted by the

baby unit. You can assign a minimum or maximum temperature to this

function and have the unit sound an alarm when these values are exceeded:

1. briey press the button to activate the touch-

screen

2. press and hold the M button for 3 seconds to

open the menu

3. use the and buttons to select the option

TEMP ALARM

4. briey press the M button

5. use the and buttons to select whether you

want to set or adjust the lower or the upper limit

6. briey press the M button

7. use the and buttons to adjust the selected temperature limit and

briey press the M button

8. repeat step 5-7 if you want to set the other temperature limit

9. briey press the button to conrm the set temperature limits and to

leave the menu

• the upper limit can be set between -3°C and 50°C

• the lower limit can be set between -19°C and 3 degrees lower than the

upper limit

• select ‘‘OFF” if you don’t want to set an upper or lower limit

• when the set temperature limit is exceeded, the temperature display will

start flashing while ‘TOO WARM’ or ‘TOO COLD’ is shown

• if the ALARM TONE function is activated, you’ll also hear short

notification tones

• don’t forget that the temperature display is only an indication, you’ll have

to take a tolerance of +/- 2°C into account

• at temperatures above 50°C and under -19°C, ‘- -’ will appear in the

display

5.3 DISPLAY LIGHT BRIGHTNESS:

You can adjust the intensity of the display light as follows:

1. briey press the button to activate the touch-screen

2. press and hold the M button for 3 seconds to open

the menu

3. use the and buttons to select the option

BRIGHTNESS

4. briey press the M button

5. use the and buttons to select the desired

brightness

6. briey press the button to conrm you selection

and to leave the menu

• you can choose from 8 brightness levels

• a high brightness level ensures good readability, but also uses more

power.

5.4 NAME OF THE BABY UNIT:

Instead of the standard name “BABY-1” of the baby unit, you can program

your own chosen name.

1. briey press the button to activate the touch-screen

2. press and hold the M button for 3 seconds to

open the menu

3. use the and buttons to select the option

NAME

4. briey press the M button

5. use the and buttons to select the desired

baby unit (only when using multiple baby units)

6. briey press the M button, ‘BABY 1’ will appear

in the display (or another name you already set

earlier) and the cursor ( _ ) will ash underneath the rst letter

7. change the rst letter using the and buttons and briey press the M

button

8. repeat step 7 until the name is fully entered

9. briey press the button to conrm you selection and to leave the

• you can choose any of the 26 letters in the alphabet, the numbers 0-9

and a space

• the name has a maximum length of 14 characters, including spaces

• you cannot correct a mistake; in this case, leave the setting and start

again

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alecto DBX-63 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 16,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alecto DBX-63 Manual

Product: