633322
46
Zoom out
Zoom in
Previous page
1/48
Next page
MAINTENACE:
To keep your CO detector in proper working order, please follow these easy steps:
Check whether the alarm is working properly by pressing the test button every week.
Clean the CO detector with a vacuum cleaner or with a soft cloth or brush once every month
to remove excess dust.
Check whether the batteries are damaged, exhausted or corroded.
Explain to children that they should not play with the CO detector.
Ensure children are aware of the dangers of carbon monoxide poisoning.
Never use cleaning agents or other solutions to clean the CO detector.
Never use air fresheners, hair spray or other aerosols near the CO detector.
Don’t paint the CO detector. Paint covers the vents preventing the sensor from detecting CO.
Never disassemble, repair or modify the product yourself; there’s a high risk that it will no
longer function correctly or reliably.
BATTERY REPLACEMENT
To replace the battery, slide the backplate down a half centimeter and then remove it to see the
battery compartment.
SENSOR REPLACEMENT:
The sensor has a lifespan of 7 years. After 7 years you should replace the entire product because
the sensor cannot be replaced.
If the yellow LED illuminates within these 7 years, even though you’ve reconnected or replaced
the batteries, please refer to the paragraphs Reason for sensor fault and Sensor fault caused by
chemical gases.
If the red LED switches on, the yellow “FAULT” LED illuminates 2x and 2 beep tones are emitted
while appears in the display, the entire product should be replaced.
SPECIFICATIONS:
Power supply: 3 x LR6, 1,5V AA high energy Alkaline batteries
Sensitivity and time: 33ppm, alarm is not activated within 120 minutes
55ppm, alarm is activated within 60~90 minutes
110ppm, alarm is activated within 10~40 minutes
330ppm, alarm is activated within 3 minutes
standby consumption: 80µA ± 10µA
consumption at alarm: 45-75mA
Sound pressure at alarm: >85dB (1m distance)
Environmental conditions: 0~45°C, 0~90% humidity.
Screen display: 25-550PPM ±10% deviation
Temperature display: -15°C - 50°C ±1°C (Only shown when the CO is below 25PPM)
Dimensions: 90x120x40mm
Weight: 220g
Type: Type B (unchecked output)
DECLARATION OF CONFORMITY
The declaration of conformity is available on the website http://DOC.hesdo.com/COA-28-DOC.pdf
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alecto COA-28 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alecto COA-28 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 16.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alecto COA-28

Alecto COA-28 User Manual - Dutch, French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info