“Err P” is shown on LCD panel:
- Fail to inflate. Please check if the cuff is too loose
and fasten it.
“Err 1” is shown on LCD panel:
- Deflate too fast. Please send it to service point
“Err 2” is shown on LCD panel:
- Movements occur on wrist. 1.Keep still after you
push the Start button. 2.Other interference signal
around BDM-100. Please remove interfering sources
such as Magnetic material or cell phone.
“Err 5” is shown on LCD panel:
- Incorrect measured result. 1.The cuff might place
incorrect. Please re-wrap the cuff in correct position.
2.You might use it incorrectly, such as measure
pressure value on child.
If correct measurement is impossible even after chec-
king the above-mentioned points, consult at the store
where you have purchased the unit or the nearest
dealer without touching the internal mechanism.
In some cases, there may be error due to the physical
condition of the person. In such cases, please consult
your doctor.
28