628380
37
Zoom out
Zoom in
Previous page
1/46
Next page
ALD-10764 37
How to glue the outside unit:
1. Mark the location of the external unit with a pencil. Now remove the external unit from the roof.
2.Sandthesurfaceyoumustglue(roof,underthetwoxationplatesoftheexternalunit)with
sandpaper(mediumgrain).
3. Clean each surface with a thinner.
4. Spread SikaAktivator -205 on the sanded surface.
Leave to dry for 15 to 20 minutes.
5.GluegenerouslythexationplatesoftheexternalunitwithSikaFlex-521UVthenpressslightly
on the unit. Layer of glue: ± 3 mm.
Leave to dry for 24 hours.
How to place and glue the waterproof cable box:
1. Position the waterproof cable box on the roof at the appropriate place and mark the location with a pencil.
Now remove the waterproof cable box.
2. In the center of this mark, drill a hole of the correct dimension, to enable the passage of the coax,
skew and motor cable without having to bend them. You must be able to cover the entire hole with the
waterproof cable box.
3. Smoothen the hole to avoid damaging the cables.
4. Thread the 2 cables through the hole (towards the inside of the vehicle) and place the waterproof cable
box on the roof making sure the cables are nor stuck nor bent. Increase the size of the hole if necessary.
5. Sand the surfaces that you have to glue (roof and under the waterproof cable box) with sandpaper
(medium grade).
6. Clean each surface with a Wax and Grease remover.
7. Spread SikaAktivator -205 on the sanded surfaces.
Leave to dry for 15 to 20 minutes.
8. Glue generously the fastening parts of the waterproof cable box with SikaFlex -521 UV then press slightly
on it. Layer of glue: ± 3 mm.
It is strictly forbidden to fill the entire waterproof cable box with glue !!!
Leave to dry for 24 hours.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alden AS3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alden AS3 in the language / languages: English, German, French as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info