628382
33
Zoom out
Zoom in
Previous page
1/46
Next page
ALD-10764 33
For a good quality picture, do not use the existing coax. cable circuits. Generally, it is recommanded to avoid all
connections.
You must provide a separate power supply equipped with a 5 Amp. fuse directly from the board battery to the
S.S.C
®
/receiver/A.I.O
®
.
You must provide a separate power supply equipped with a 3 Amp. fuse directly from the main electric board to
the S.S.C
®
/receiver/A.I.O
®
for the
Plus after ignition
connection (only with Alden automatic satellite systems).
You must protect the ends of the motor and coax. cables with paper tape during installation (especially when
threading the cables through furniture).
Only connect the LNB when the system is not connected to the power supply: the receiver/S.S.C
®
must be unplugged
before being connected to the LNB (low noise block converter). If not this could cause serious dammage to the LNB
circuit.
The warranty will become void if original or certified parts are not used. All repairs must be made by qualified
technicians.
When connecting the cables, make sure the satellite system and S.S.C
®
/receiver/A.I.O
®
are not connected to the
power supply. Wait a few seconds after having switched the systems off before moving them or disconnecting
them.
After having followed the instructions, if the system does not work, contact your dealer.
If you accept to install the equipment, you also accept the above rules.
WEEE Directive (European Union and EEA only).
This symbol indicates that this product is not to be disposed of with your household waste, according to the WEEE Directive
(2002/96/EC) and your national law. This product should be handed over to a designated collection point, E.G., on an authorized
one-for-one basis when you buy a new similar product, or to an authorized collection site that recycles waste electrical and
electronic equipment (EEE). Improper handling of this type of waste can have a negative impact on the environment and human
health due to potentially hazardous substances that are generally associated with EEE. By respecting this directive, you will
contribute to the effective usage of natural ressources. For more information about where you can dispose of your equipment for
recycling, please contact your local city office, or other authority, approved WEEE scheme or your household waste disposal service.
(EEA : Norway, Iceland and Liechtenstein)
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alden AS2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alden AS2 in the language / languages: English, German, French as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info