626270

Alde 3010 Control panel - 213 LCD Manual

14
Zoom out
Zoom in
Previous page
1/104
Next page
14
Switch off the heater4.
Press the button with the arrow 1.
until “On” (main breaker) in the
display flashes.
Press the -/Off button. “Off” 2.
(main breaker) in the display
flashes.
The settings are ready. “Off” 3.
(main breaker) is shown in the
display when the panel returns
to standby.
blinkar
flashes
blinkar
flashes
Set the desired temperature5.
Press the button with the arrow 1.
until the symbol for selecting
temperature flashes.
The temperature shown is the
temperature which is set at
present (in this case 22.0°C).
Increase the temperature by 2.
pressing the +/On button. Lower
the temperature by pressing the
-/Off button. The diagram shows
that we have set the tempera-
ture at 25.0°C.
The settings are complete and 3.
the boiler is working at the set
temperature.
The temperature can be set from +5°C to 30°C in intervals of 0,5°C.
Warm water6.
Press the button with the arrow 1.
until the symbol for selecting
warm water flashes. The “OFF”
text is shown next to the tem-
perature on the display.
Switch the warm water on by 2.
pressing the +/ON button.
The “ON” text is shown next to
the temperature on the display.
The warm water symbol is dis-3.
played when the panel returns
to standby.
If you need more warm water you can increase the
quantity temporarily for 30 minutes by increasing the
water temperature from 50°C to 65°C.
When 30 minutes have elapsed, the water temperature
returns to 50°C and the symbol goes out. When you
have selected more warm water, the circulation pump
stops.
Press the button with the arrow 1.
until the warm water symbol
flashes. The “ON” text is shown
next to the temperature on the
display.
Switch off the warm water by 2.
pressing the -/Off button.
The “OFF” text is shown next to
the temperature on the display.
The warm water symbol goes 3.
out when the panel returns to
standby.
If you want you can switch off more warm water before 30 minutes have elapsed.
blinkar
flashes
blinkar
flashes
blinkar
flashes
blinkar
flashes
blinkar
flashes
blinkar
flashes
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alde 3010 Control panel - 213 LCD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alde 3010 Control panel - 213 LCD in the language / languages: All languages as an attachment in your email.

The manual is 5,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info