Manual Alde 3010 Control panel - Touch-Screen Colour 613 (page 15 of 76) (English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish)

626271

Zoom out

Zoom in

1/76

9. Automatic anti-bacterial mode

(legionella)

At 02.00 at night (if the clock is set) the

boiler starts and works according to “Hot

water boost” (see section 5). This is in

order to reduce the risk of legionella. The

function is deactivated in the factory set-

ting.

10. Offset (temperature adjustment)

Using this function, you can calibrate the

temperature on the panel if you notice that

the temperature (the stabilised room tem-

perature) is not the same as the tempera-

ture shown on the panel. This also applies

to outdoor temperature.

11. Button sound

With this function, you can activate or

deactivate the button sound.

The button sound is activated in the factory

setting.

12. Screen Brightness

Brightness: The brightness of the display

(working mode) can be adjusted from 1 to

10. Factory setting is 5.

Standby brightness:

Off: Used to turn the display’s backlight-

ing off so that the display is turned off

(becomes dark) in standby mode (the LED

is still active).

On: Used to activate the backlighting in the

display (low lighting) in standby mode (the

LED is still active). Factory setting is On.

13. Language

This function is used to reset the screen

between different languages. Available

languages are: English, French and Ger-

man. On the other hand, the service menu

is only in English (see section 10.1).

14. Tools / Key

Under Tools / Key you can lock or unlock

access to the tool menu.

15. *External start

This function is used when starting the

boiler from the outside, for example, with

GSM. When external start has been acti-

vated, the control panel’s On/Off button

must be switched off (see the assembly

setting manual for external start). NOTE!

To use this function, an external start

installation is required (see the manual

for the vehicle, boat or building).

Lan

Ext

Amp

*230 V

This function is used in connection with

starting the boiler when connection of

230 V to vehicle takes place from outside.

When the 230 V function has been activa-

ted the control panel’s on/off button must

be turned off, but 12 V must be connected

(the vehicle’s main switch is on). Before

turning off the control panel with the on-/

off button set the parameters/functions that

you want the boiler to have when it starts

(230 V is connected).

16. *Load monitor

This function is used to prevent the 230V

fuses being overloaded. If the total power

consumption of the vehicle, boat or build-

ing exceeds the set value, the boiler’s

power will be automatically reduced. On

account of voltage variations and toler-

ances, different setting levels can be

selected (for example, for 6A fuse, one

can choose 6 or 7 Amp setting). If the fuse

does not hold, choose a lower set value.

The function is deactivated in the factory

setting. NOTE! The load monitor has to

be installed for the function to be used

(see the manual for the vehicle, boat or

building).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alde 3010 Control panel - Touch-Screen Colour 613 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 24,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alde 3010 Control panel - Touch-Screen Colour 613 Manual

Product: