586676
19
Zoom out
Zoom in
Previous page
1/59
Next page
19
7. Your mobile phone may require a passcode. In this case the handset screen
displays Check mobile. ENTER PIN CODE. Enter the mobile phone
passcode into the handset and press SET to save.
8. Enter the PIN of the telephone base (the default PIN is 0000) into your
mobile phone to continue the pairing process. The handset displays Adding
Mobile Phone A to device list...
9. When a device is successfully connected, the handset displays Mobile
Phone A is added and connected to base. You hear a confirmation tone.
The corresponding 1 or 2 displays. The corresponding device light on the
telephone base ( or ) turns on.
4.3.2.2. Add a headset
To pair and connect a headset:
1. Repeat step 1 to 3 in last section.
2. Press or to select Add headset, then press SELECT. The screen
displays Please wait... followed by If headset is connected to mobile,
please disconnect it.
If there is another headset already active, the screen shows Only 1
headset in device list can be ready for connection and prompt you
to replace an existing paired device.
When you already have 2 active devices, the handset shows Only 2
devices can be ready for connection. The telephone base will
deactivate another headset from an active slot automatically.
3. Press NEXT. The screen displays Pls set headset to discoverable mode.
Set your headset to discoverable mode (refer to the user’s manual of your
headset), then press NEXT.
All devices that are connected to the telephone base are temporarily
disconnected.
4. The screen displays Searching for Bluetooth headsets...
5. When the screen displays the found devices, press or to select your
headset and then press SELECT.
6. Enter the PIN of your headset. The PIN for most Bluetooth devices is 0000
(refer to the user’s manual of your headset). Then press NEXT.
7. The screen displays Adding Headset A to device list... when the base is
connecting to your headset.
8. When a device is successfully connected, the handset displays Headset A
is added and connected to base and the corresponding 1 or 2. You
hear a conrmation tone. The corresponding light on the telephone base
( or ) turns on.
If you have trouble pairing your mobile or headset, it may not be compatible
with your Alcatel XP 1050.
Notes:
The pairing process may take up to one minute. If the pairing process fails,
try again.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alcatel XP1050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alcatel XP1050 in the language / languages: English as an attachment in your email.

The manual is 10,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info