496337

Alcatel Versatis XL350 Manual

5
Zoom out
Zoom in
Previous page
1/22
Next page
1. FIRST USE
1.1 INSTALLING THE BASE
1.1.1 Precautions
Signal quality will depend on the location and environment of the base and handset. Your Versatis XL 350 must be kept
away from sources of excessive heat (radiators, direct sunlight, etc.) and protected against vibrations and dust. Never
allow your telephone to come into contact with water or other liquids, or with aerosols. To reduce the risk of interference
and optimise reception, take particular care not to install the base in the immediate vicinity of windows, large metal objects,
reinforced concrete, televisions, music centres, halogen lamps or heating devices, fluorescent lighting, burglar alarms,
microwave ovens, computers, etc.
To clean your Versatis XL 350, use an antistatic cloth lightly moistened with water.
This telephone requires an electrical power supply in order to function.
NB:
Your Versatis XL 350 is a DECT™* standard appliance designed to receive and transmit telephone calls. It is designed
for connection to the European public telecommunications network.
1.1.2 Connecting the base
Connect the line cord and the power supply under the base,
as shown.
Plug the telephone jack into the wall socket.
Connect the power cable to a 230V/50Hz power supply.
4
The light on the base comes on .
1.1.3 Connecting the charger(s) for the Versatis XL 350 duo/trio
Plug the power cable into the connector on the charger.
Connect the mains adapter to a 230V/50Hz power supply.
1.2 INSTALLING THE HANDSET
1.2.1 Fitting the batteries and charging up for the first time
Once the base is connected, open the battery compartment at the back of the handset by
sliding the cover.
Insert the batteries and slide the cover back into place.
Place the handset on the base. The red light on the base comes on and it beeps
once.
4
The battery charge icon on the handset starts to move.
Before using for the first time, we recommend that you leave the handset to charge up on
the base for 24 hours in order to optimise battery life and performance.
Make sure the range symbol is on steady. If it is absent, re-register the handset as
shown in § 8.1.
Take the line by pressing .
The dial tone confirms that your Versatis XL 350 is working (if not, see Chapter 10).
2
* DECT is a registered trademark of ETSI.
Line cord
Power cable
… 5 …


Need help? Post your question in this forum.

Forumrules
1

Forum

alcatel-versatis-xl350

Reset search

  • i wish to activate the messagery on the Alcatel Versat XL350 hiw can This be done?
    Submitted on 8-12-2021 at 12:10

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alcatel Versatis XL350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alcatel Versatis XL350 in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alcatel Versatis XL350

Alcatel Versatis XL350 User Manual - French - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info