15
8. USING YOUR TELEPHONE WITH MULTIPLE HANDSETS
8.1 REGISTERING A HANDSET
The handset(s) delivered with your Versatis C650 will already be registered on the base, ready to use. You can have up
to 6 handsets associated with (“registered on”) the base of your telephone. To add another handset, follow the registration
procedure below.
In the Initial Setup menu:
Press or to select the REGISTRATION submenu.
Press to open the menu. The display reads YES
4
NO. The default setting is NO.
Use or to select YES.
If YES is selected, press . The display reads HOLD BASE FIND KEY FOR 5 SECS. Press and hold down on
the base; the indicator flashes, then press . (The handset must be close to the base during the registration
process). Enter the PIN (by default, 0000) and press to confirm.
Press . The display reads REGISTERING…, then REGISTERED.
8.2 DEREGISTERING A HANDSET
This procedure must be carried out on a different handset from the one you want to uninstall.
In the Initial Setup menu:
Press or to select the DEREGISTRATION submenu.
Press to open the menu. The display reads YES
4
NO. The default setting is NO.
Utiliser or to select YES.
Press ; the message MOVE NEAR TO THE BASE appears for a few seconds, then YES NO appears on the
display.
Use or to select YES or NO.
If you select YES, press to confirm. Enter the PIN (by default, 0000). The display reads DE-REGISTER... The set
beeps to confirm. Then the display indicates DEREGISTERED to confirm that the handset has been successfully
uninstalled.
Note: Once the deregistration process is finished, the message HANDSET NEEDS REGISTRATION appears on the
display. To use the handset again, you MUST re-register it using the registration process.
8.3 USING THE INTERCOM FEATURE
Press on the handset.
Using the keypad, select the handset you want to call (Trio version only).
The called handset rings. Its display shows PAGING FROM followed by the name of the calling handset.
Press to answer.
When you have finished, press on either handset to quit intercom mode.
8.4 SHUTTLING CALLS
While on the line with an external correspondent, you can call an internal handset:
Press , dial the number of the handset you want to call (Trio version only).
4
The external correspondent is placed on hold.
4
The two internal correspondents can talk to each other.
To get back to the external correspondent, press .
