586679
15
Zoom out
Zoom in
Previous page
1/22
Next page
Temporis IP80 User’s guide V1.0 Page 15
4.8. Relay management
1: Relay mode:
Possible values are 1 to 5, with the following meaning :
1: trigger mode: the relay is activated by the called party for the “Relay closing” time
duration (eg: electrical locks, door opening …). If the called party is using a phone, he
must dial the corresponding code. By default 55 for the relay 1 and 66 for the relay 2.
2: Camera mode: The relay is activated automatically during the call and released
immediately when the call is over (eg: external camera)
3: Lighting mode: The relay is activated automatically during the call and released after
the “Relay closing” timeout starting from the moment the call is over (eg: external
lighting)
4: Bell mode: The relay is activated when you press the button and released after the
“Relay closing” timeout (eg: external bell).
5: Sequential opening mode (only for relay 2): in this mode the relay 2 is activated some
time after the relay 1 has been released.
2: Activation code from phone: DTMF code to be dialed from a phone during the conversation
which will trigger the relay.
3: Duration of relay closing in seconds (2 digits [01-99] )
4: Incoming call Control: to prohibit the relay control by an incoming call when the relay is already
in operation.
5: Delay (in seconds) between the release of relay 1 and the automatic activation of relay 2 when
the relay 2 is configured in mode 5 (2 digits [01-99] ).
1
2
3
4
5
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alcatel Temporis IP80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alcatel Temporis IP80 in the language / languages: English as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info