2
Getting started ....................
2.1 Set-up
Inserting and removing the SIM card
(1)
You must insert your SIM card to make phone calls.
16
Place the SIM card with the chip facing downwards and slide it into its
housing. Make sure that it is correctly inserted.To remove the card, press
it and slide it out. Please power off your phone before you remove the
SIM card.
Installing the battery
Insert and click the battery into place, then close the telephone cover.
(1)
Check with your network operator to make sure that your SIM card
is 3V compatible. The old 5 Volt cards can no longer be used. Please
contact your operator.
WAP alerts
(1)
.
Roaming.
Memory card scanning in progress.
Memory card scanning completed.
Double line
(2)
: indicates the selected line.
GPRS connection status (Blue - Activated).
Multimedia player active.
USB cable connected.
Reception of a message in progress.
Sending a message.
Silence mode: your phone neither rings, beeps nor vibrates
except for the alarms (see page 39).
Message unread
Message list is full: your terminal cannot accept any new
messages.You must access the message list and delete at least one
message on your SIM card.
Preferred tariff areas
(2)
.
Antenna off mode.
A2DP connected.
15
(1)
Depending on your network operator.
(2)
Contact your network operator to check service availability.