Manual Alcatel-Lucent OmniTouch 4135 IP (page 47 of 53) (English)

611049

Zoom out

Zoom in

1/53

IP stands for Internet Protocol and is the standard protocol for transferring information

over the Internet between computers and other devices. The same standard is normally

used in local networks too. An IP address is the unique network address that a compu-

ter has in the network.

An IP phone is a phone that, like a PC, is connected to the network/Internet. Like the

PC, it has an IP address and the call is transmitted as data packets over the network.

Calls can be made from an IP phone to other IP phones (without leaving the network)

and to regular phones over the public telephone network.

SIP stands for Session Initiation Protocol and is a standardised protocol (communication

regulations) for connecting phone calls via networks – in most cases via the Internet

too.

To make and receive calls, the phone has to be registered to an SIP switch. The switch

can be a company PBX or be located with an IP telephony service provider. The SIP

switch ensures that the call is connected to the right address within the network or

sends the call to the public telephone network if the recipient is not registered as an IP

telephone in the same switch.

Making calls with IP phones

When you use an IP phone to make a call to another IP phone within the network,

the call does not usually cost anything. When you use an IP phone to make a call to a

regular analogue phone, you normally pay the standard rate from the point at which the

SIP switch connects the call to the telephone network.

An IP phone can be moved and used all over the world. The only requirement is access

to the Internet or, to be more accurate, access to the SIP switch where it is registered.

Users must bear in mind that calls to analogue phones are connected to the telephone

network where the switch is located.

A company can make free calls to its ofces in different countries provided it uses IP

phones connected to the same SIP switch. If the SIP switch being used is in another

country, it may be necessary to have two SIP accounts in the phone. One for the

company’s internal IP calls and one for local external calls via the analogue telephone

network. Otherwise there is a risk of making overseas calls to order a pizza from down

the road.

Phone numbers and network addresses

An IP phone has a normal phone number plus a network address. When someone calls

an IP phone number, the SIP switch converts the call into data packets that are sent

over the network to the phone’s network address.

You can make a call from an IP phone to another using the network address. When you

send an email to someone, you don’t need to know the computer’s network address,

and it’s the same when you make a call from an IP phone, you don’t need to know the

IP, SIP, URI AND IP TELEPHONY

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alcatel-Lucent OmniTouch 4135 IP in the language / languages: English as an attachment in your email.

The manual is 2,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alcatel-Lucent OmniTouch 4135 IP

Alcatel-Lucent OmniTouch 4135 IP User Manual - German - 53 pages

Alcatel-Lucent OmniTouch 4135 IP User Manual - German - 27 pages

Alcatel-Lucent OmniTouch 4135 IP User Manual - French - 27 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alcatel-Lucent OmniTouch 4135 IP Manual

Product: