813391
85
Zoom out
Zoom in
Previous page
1/102
Next page
User Manual
8AL91434ENAAed01 85 /102
5.5.3.1 Remove the customization kit
A
B
C
1
Slide your fingernail along
the piece to detach it from
the phone.
This piece is clipped to the four
corners. We recommend starting
from the back of the desk phone.
Carefully insert a thin, non-sharp
object over the colored piece on
left side.
Press, then slide the
piece towards the bottom
of the device a few
millimeters with your
thumbs.
2
Pull perpendicular to the
desk phone along the entire
length of the piece. Be
careful not to break the
clips.
Gently lift the piece by pushing
forward (you will hear a small click
when the piece is removed).
Remove the piece by
lifting it.
Be careful not to break
the clips.
3
Insert the thin, non-sharp object on
the right side.
4
Gently lift the piece by pushing
forward (you will hear a small click
when the piece is removed).
5
Remove the piece by rotating it as
shown in the drawing.
5.5.3.2 Install the custization kit
A
B
C
1
Place each clip facing the
corresponding notches. Be
careful to place the piece in
the correct direction: the
logo must be on the right
hand side.
Insert the piece around the speaker
of the station.
Press as shown in the drawing to
clip the piece in the front (you
should hear a small click when the
clip is in its notch).
Place the piece by
respecting the notches.
2
Press perpendicular to the
desk phone all along the
piece. Press gently so as not
to force and break a clip.
Push the piece by slight rotation
until it is in its place.
Slide the piece to the top
of the hands a few
millimeters with your
thumbs.
3
Press as shown in the drawing to
clip the piece in the back (you
should hear a small click when the
clip is in its notch).
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alcatel-Lucent ALE-300 Enterprise DeskPhone at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alcatel-Lucent ALE-300 Enterprise DeskPhone in the language / languages: English as an attachment in your email.

The manual is 4.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info