Plug the USB cable into the USB port of your phone. The other end of the USB cable
can be plugged into the AC/DC adaptor or into a computer USB port.
You can also charge your phone from any USB plug, such as a computer USB plug. However, the charging
time is longer than charging with the AC/DC adapter. Charging time depends on the power source where
the cable USB is plugged (computer, AC/DC adapter, …).
2.4.4 LED
• Green steady: the phone is on the charger (or connected to the USB cable) and the battery is fully
charged.
• Red steady: the phone is on the charger and the battery is charging.
Recharge your telephone battery regularly. The telephone can be on or off when recharging the battery. If
the telephone is to remain unused or out of its charger for several weeks, remove the battery and store it
separately.
The battery charging time is less than 3 hours. The charging time is longer if charging through the USB
plug from a device other than the AC/DC adapter.
2.4.5 Autonomy of your telephone
On standby in the radio coverage zone. Up to 160 hours.
In continuous conversation. Up to 20 hours if economy mode is activated, 17 hours if economy mode is not
activated.
Switch off the telephone before changing the battery.
2.5 Switching on your telephone
If the display fails to light up or the battery icon is flashing, recharge the battery.
If the radio reception icon doesn't appear on the telephone display:
• Check that you're in an area covered (if you're not, move close to a radio base station).
• Check that the telephone is properly installed in the system (consult the PABX manager).
If the display indicates: 'Auto install ?', see paragraph 'Registering the telephone' or contact your installation
technician.
2.6 Switching off your telephone
• Press the switch on/off key (long press).
• Select the switch off feature.
• Your telephone is switched off.
