• If the registration operation runs correctly (Subscription accepted), the telephone is ready for use, and
the radio coverage icon appears.
• If the registration operation has not been successful, the station proposes launching the subscription
again.
• Depending on the type of system concerned, registration may require one or more additional operations
on the system.
During registration phase, to improve security and optimize registration in a multi-system environment, the
handset enforces a minimum signal strength level to accept to register to a base station. To achieve the
conditions, it is recommended to perform registration in a place where a base station is in direct visibility
within a 20 m range. If base station is not visible the range shall be lowered.
During registration phase in a multi-system environment, all systems are scanned without priority. The
system is selected when the signal strength is above a certain level and registration matches.
6.2.2 Selecting your telephone system
Your telephone can be programmed to function on 4 different DECT systems.
The selection is retained even after switching the telephone on/off. The selection of a specific system
(SYSTEM...) forces operation on a specific system. This selection must be changed if one wishes to
change system. Selecting 'Auto. select' enables the telephone to connect automatically when it enters a
system coverage zone. If the systems programmed in the telephone have common coverage zones, the
telephone selects the first system found.
