20
Note: The default profile cannot be deleted.
• ";||bm]-v7;=-Ѵ|Ĺ
1) Select the profile from the profile management list.
2) Click Set default.
Note: Once the new profile has been set as default, (Default) will be added next
to the profile name.
5.1.3 ;|ouhv;||bm]v
You can set the network search mode to either Auto or Manual, and change the
network mode to Auto, 2G only, 3G only or 4G only. Make sure that you click
Apply after making any changes.
5.1.4 om|_ѴrѴ-m
Here you can set your monthly data plan, set a data limit, configure auto-
disconnect settings, etc.
5.2 WAN
5.2.1 WAN status
Here you can view detailed information on the wide area network (WAN),
including IP address, subnet mask, gateway, DNS server, etc.
5.2.2 om=b]u;)
Set up the WAN connection mode and parameters here. You can set the
connection mode to PPPoE, DHCP or static IP.
PPPoE: PPPoE stands for Point-to-Point Protocol over Ethernet. This is a network
protocol that is mainly used for DSL services whereby individual users connect
to a modem using an Ethernet connection. Enter the username and password
provided by your network service provider and click Apply.
DHCP: Dynamic Host Configuration Protocol (DHCP) is a client /server protocol
that automatically provides you with an Internet Protocol (IP) host. The IP address
and related configuration settings such as subnet mask and default gateway are
all automatically assigned. Select DHCP and click Apply.