101 102
• When the phone falls into a loop during power on
animation and the user interface can't be accessed,
press and hold the Power key to reset. This eliminates
any abnormal OS booting issues caused by third
party applications.
• If neither method is effective, reset the phone by
pressing the Power key and the Volume up key at the
same time, selecting a language, and then selecting
Wipe data/Factory reset. Press the Volume key to
select, and press the Power key to confirm each
selection.
My phone has not responded for several minutes
• If your phone doesn’t respond, turn off your phone
by pressing and holding the Power key until it turns
off and then restart it again.
• If your phone has a removable battery, remove the
battery and reinsert it, then restart the phone.
• If it still doesn't work, reset the phone.
My phone turns off by itself
• Check that your screen is locked when you are not
using your phone, and make sure that the Power
key is not accidentally pressed while the screen is
unlocked.
• Check the battery charge level.
• If it still doesn't work, reset the phone or update
software.
My phone can't charge properly
• Make sure that you are using the Alcatel charger that
comes with the phone.
• If your phone has a removable battery, make sure
that your battery is inserted properly and clean the
battery contact if it’s dirty. It must be inserted before
plugging in the charger.
• Make sure that your battery is not completely
discharged; if the battery power has been empty for
a long time, it may take around 20 minutes to display
the battery charging indicator on the screen.
• Make sure that charging is carried out under normal
conditions (0°C (32°F) to 40°C (104°F )).
• When abroad, check that the voltage input is
compatible.
My phone can't connect to a network or "No service"
is displayed
• Try connecting to the network by moving to another
physical location.
• Verify the network coverage with your operator.
• Check with your operator that your SIM card is valid.
• Try connecting at a later time if the network is
overloaded.
