Manual Albrecht Tectalk Pro XL (page 41 of 64) (English, German)

622041

Zoom out

Zoom in

1/64

PTT or MODE button or wait for 5 seconds to store your

choice.

• Switch on the unit whose settings are to be changed (the slave

unit). Press the MODE button until 'CL' appears. Use the UP or

DOWN buttons and select 'IN'. Press the PTT or MODE button or

wait for 5 seconds to store your choice. The radios LED will turn

green to indicate that it is ready to receive data.

• Press the PTT button of the master radio while the slave radio LED

is green. The LED of the slave radio will go off. The master radio

and slave radio will emit a confirmation beep.

• If the cloning procedure should fail, the slave radio sends an error

beep and the LED remains green. Repeat step 4 until a

confirmation beep is heard. If repeated cloning attempts should fail,

repeat the whole procedure from step 1.

If the cloning procedure was successful switch off both radios and

disconnect the cloning cable. Switch on the slave radio to use the copied

data.

Squelch Level Adjustment

This function allows you to adjust the squelch level of your radio. To change

the squelch level, press the Squelch/Mon button briefly. The current

squelch setting will flash. Use the UP or DOWN button to change the

setting. Press PTT or wait for 5 seconds to store your choice.

There are 15 squelch levels. Level 1 is the most sensitive (open) and level

15 is the least sensitive (closed). Auto is the optimum factory setting and 'Off'

is fully open, with constant static noise.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Albrecht Tectalk Pro XL in the language / languages: English, German as an attachment in your email.

The manual is 2,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Albrecht Tectalk Pro XL Manual

Product: