228448

Albrecht bt 2000 bluetooth Manual

7
Zoom out
Zoom in
Previous page
1/9
Next page
Troubleshooting
Under certain circumstances it cannot be excluded totally that current supply interruptions or interferences
may perhaps have influence on the correct functions of the set. In case of a malfunction you may re-establish
the connection by this simple test procedure in exactly the following sequence:
• Switch off the audio-gateway by unplugging the DC power cable from audio-gateway
• Switch off Bluetooth
TM
headset, too
• Insert power cable again into audio-gateway
• Switch on Bluetooth
TM
headset again
After a short moment both units should be paired again together.
If the above described method does not help, a „general reset“ back to the factory default settings may help.
This general reset is also necessary in all cases, where the headset has been used in connection with other
Bluetooth
TM
devices and shall now be re-connected to your individual audio-gateway. The general reset
procedure includes pairing and resetting both partner units (headset and audio-gateway), otherwise they
cannot establish a secure transmission system.
Starting general reset
Please follow the instructions in exactly the described sequence!
• (1) Switch your headset OFF with power switch (slide switch).
• (2) Switch headset ON again
• (3) Press all 3 keys at headset simultaneously at the same time and keep them pressed for
about 3 seconds. Hold headset during that procesure close to your ears. You will hear s short
melody marking a successful reset. If you do not hear the melody within 1-2 seconds, the reset
was not successful and you should repeat steps (1) to (3).
• Release all buttons.
• Switch the headset 1 x OFF and ON again at the slide switch (power off-on).
• Place the headset close to the audio gateway.
• Press and hold the TEST/PAIRING button on top side of the audio-gateway and keep button
pressed for about 6 seconds (during this time the test LED will flash)
• Release button
• Disconnect the 5 V DC power supply plug from the audio-gateway.
• Wait for about 1 second and insert the DC plug again into audio-gateway.
• Place the headset into the charging cradle, wait and observe the test-LED. The LED will flash for
some seconds until the pairing process will be finished.
• After pairing process is completed, you will hear a melody from the plugged-in headset. Now you
may take out the headset and use it.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Albrecht bt 2000 bluetooth at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Albrecht bt 2000 bluetooth in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Albrecht bt 2000 bluetooth

Albrecht bt 2000 bluetooth User Manual - German - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info