647636
19
Zoom out
Zoom in
Previous page
1/28
Next page
19
Repeatedly press BAND to select a band you want to
scan.
Press
or to select turn On or OFF the band.
Press PWR or wait for 2 seconds to go back to Memory
Scan Mode.
Note: You can choose the band also in Frequency Mode
with the steps above.
When the scanner finds a transmission, it stops on it. When
the transmission ends, the scanner resumes scanning
automatically after the delay time (see Delay on next page).
Notes:
If you have not stored frequencies into any
channels, the scanner does not scan.
If the scanner picks up unwanted partial or very
weak transmissions, increase the squelch level.
Decrease the scanner's sensitivity to these
signals.
To listen to a weak or distant station, reduce the
squelch level (0 is squelch open).
Manually Selecting a Channel
You can continuously monitor a single channel without
scanning. This is useful if you hear an emergency broadcast
on a channel and do not want to miss any details - even
though there might be periods of silence - or if you want to
monitor a specific channel.
During scanning, if the radio stops at a channel
you want to listen to, press RSM/HOLD once.
(Repeatedly pressing
or at this time
causes the scanner to step through the channels.)
Press RSM/HOLD to resume automatic scanning.
Switching the Mode
Follow the steps below to switch between Frequency Mode
and Memory Mode.
Repeatedly press F/ M to display FREQ.
Now the scanner is in Frequency Mode.
Repeatedly press F/ M to display MEM.
Now the scanner is in Memory Mode.
Special Features
Delay
You can program from 0 to 5 delay into any channel or
frequency. If you set delay time for 1 to 5 seconds, scanner
continues to monitor the channel frequency for 1 to 5
seconds after the transmission stops before resuming
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Albrecht AE30H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Albrecht AE30H in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Albrecht AE30H

Albrecht AE30H User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info