English 85
Setting up your Scanner
When you turn on your scanner for the first time, you can set your screen
display preferences as well as other elements such as squelch levels,
volumes, brightness, etc.
Using the SCROLL CONTROL Knob
Turn the SCROLL CONTROL knob on top of the AE125H to:
• Select channels
• Adjust volume
• Adjust squelch
• Set display settings
• Selects characters for text tagging
• Scroll up or down through menu options
• Change channels/frequencies in Hold mode
• Resume scanning
Press the SCROLL CONTROL knob to select a setting.
Note: Pressing SCROLL CONTROL is the same as pressing Pgm/E on
the keypad in Menu mode.
Adjusting the Volume
1. Press SCROLL CONTROL; The volume level indicator and
battery voltage display.
2. Turn SCROLL CONTROL to adjust the volume level from 0
to 15.
3. Press SCROLL CONTROL to set the volume.
4. To exit Volume Level mode, press SCROLL CONTROL
again or wait 10 seconds to return to the previous mode.
Adjusting the Squelch
1. Press Func, then press SCROLL CONTROL. The squelch
level indicator and battery voltage appears.
2. Turn SCROLL CONTROL to change the squelch level from
0 to 15.
3. Turn SCROLL CONTROL until the audio mutes. If the
scanner picks up unwanted partial signals or very weak
transmissions, increase the Squelch setting to increase the