567469
26
Zoom out
Zoom in
Previous page
1/40
Next page
6
Antenna Installation
To obtain the best performance from your CB radio is important to install a good quality
antenna.
You should purchase a suitable mobile antenna designed for the 27MHz
frequency band.
Connect the antenna to the rear antenna socket using a PL259 coaxial
connector. Where necessary, solder the connector carefully at the inner
connector of the coaxial cable and avoid any short circuit with one of the thin
copper wires of the outer coaxial shielding.
To obtain maximum performance from the transceiver, mount the antenna in a
suitable position for good and free radiation from the metallic car surface.
Standard mobile antennas need a good car body ground connection for best
efficiency. Most standard mobile antennas cannot work without car body ground
connection!
Most CB antennas (except our “Gamma” series) need a fine tuning for best
SWR.
Special ground less antennas are obtainable for motor homes or trucks in cases
where the antenna position is made from plastic or fiberglass or where a
grounding is not possible. Such antennas do only work on fiberglass or plastic
car body structures and do not work immediately on metallic structures.
Do not use any transmit function (e.g. PTT) before installing the antenna.
Antenna SWR information
For radio communications, each antenna should have a good matching to avoid too
much energy loss across the transmission lines or defects of transmitter stages or
power amplifiers
A good antenna obtains an SWR (Standing Wave Ratio) of 1.5 or even better.
This means that most of the transmitting power is forwarded correctly from
transmitter via cable to the antenna, and that the amount of reflected power is small.
It is easy to measure the SWR, whic
h is as well a good indicator for the correct
installation. An SWR meter is a basic and cheap test instrument, which should
belong to the toolbox of any installer and radio specialist.
High SWR values (more than SWR = 3.0 ) not only may damage the transc
eiver but
also lead to interference problems with other electronic items.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Albrecht AE 6490 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Albrecht AE 6490 in the language / languages: English, German as an attachment in your email.

The manual is 3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info