785819
21
Zoom out
Zoom in
Previous page
1/32
Next page
8
17
Loosen and remove the lower adjustment knob [13] and pull the standpipe [15]
together with the attached backrest [19] from the drive unit.
Pull the seat [20] upwards and remove it.
Loosen and remove the adjustment knob [1] and pull the foot support [3] from the
drive unit.
After these simple steps, the scalacombi is dismantled for easy stowing and transporta-
tion.
To facilitate loading, the drive unit can be lifted by the protruding rectangular tube sec-
tions. To prevent hands and clothing becoming dirty, clean the tubes with a moist cloth.
To assemble the scalacombi, complete the above steps in reverse order. Please note that
the three adjustment knobs [1], [13] and [16] must be firmly tightened. Readjust the
handlebar to the shoulder height of the operating person (see chapter 2.1).
When transporting the scalacombi never touch or reach into the
wheels of the stair climber. To transport the scalacombi, hold the
device as described above by the protruding rectangular tubes. To
prevent inadvertent switching on of the stair climber during trans-
port, disconnect the plug [12] from the socket [11] on the control
unit.
7.2 Instructions for storage and transportation
During transport, the scalacombi or its dismantled parts must be properly secured so
that they do not pose a risk to the driver or passengers in the event of a sudden brake
manoeuvre. To secure the scalacombi in the car, we recommend tying the individual com-
ponents with suitable straps to the vehicle. Please note that it is the responsibility of the
owner to ensure that all components are properly secured and that Alber GmbH shall not
be held liable for any damage caused by unsecured parts.
Please check whether there are specific regulations regarding the transport of the scala-
combi or its components in your jurisdiction and strictly adhere to these regulations.
Alber GmbH and its agents shall not be liable for any damage resulting from non-compli-
ance with these instructions.
20
20
15
13
1
3
!
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alber Scalacombi eco S34 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alber Scalacombi eco S34 in the language / languages: English as an attachment in your email.

The manual is 2.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alber Scalacombi eco S34

Alber Scalacombi eco S34 User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info