785819
12
Zoom out
Zoom in
Previous page
1/32
Next page
8
2.3 Sitting down on the seat
To secure the scalacombi against inadvertent movement during the transfer of a person
to the stair climber, move the drive wheels a little backwards away from the pushing
position (see diagram to the left) so that the housing is properly placed on the floor.
To do this, switch the scalacombi on (see chapter 2.4) and then press the driving switch
[17] to its lower position (see chapter 3.1). Then switch the scalacombi off (see chapter
2.5).
Before allowing a person to sit down on the scalacombi, ensure that the stair climber is
switched off!
The passenger normally sits down on the stair climber seat [20] from the front. If this
cannot be done easily or is not possible at all, you can remove the two armrests [21] to
transfer the person to the stair climber, using for example a seating aid.
To do this, pull the two armrests [21] upwards from their receptacles.
Allow the person to sit down on the scalacombi and position his/her feet properly on
the footrest [2].
Insert the armrests [21] in the receptacles [14] of the scalacombi.
Ensure that the armrests [21] properly engage in the receptacles [14] and cannot be
turned.
When the person to be transported is properly seated on the scalacombi, switch the
device on and begin climbing the stairs.
If you have moved the drive wheels as described above towards a back position to facili-
tate sitting down on the climber, you should move them back to their pushing position.
To do this, switch the scalacombi on (see chapter 2.4) and then move the driving switch
[17] to its upper position until the climber is automatically switched off. The wheels are
now in pushing position (see chapter 3.2).
If necessary, secure the feet and legs of the person on the scalacom-
bi using the foot belt (optional accessory) and tighten the lap belt
(optional accessory) around the person‘s waist.
Ensure that the feet of the passenger are at all times placed on the
footrest [2].
21
2
14
14
!
!
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alber Scalacombi eco S34 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alber Scalacombi eco S34 in the language / languages: English as an attachment in your email.

The manual is 2.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alber Scalacombi eco S34

Alber Scalacombi eco S34 User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info