785845
36
Zoom out
Zoom in
Previous page
1/51
Next page
32
Display Error Remedy
B10 Energy recovery is not possible because the battery pack
has too much power
Switch the system off and then on again.
If possible, continue travelling uphill.
B11 Energy recovery too high, speed is reduced Continue to travel carefully and avoid travelling downhill.
B12 Energy recovery high Reduce your speed and avoid travelling downhill.
B13 Discharge current too high Switch the system off and then on again.
Continue to travel carefully.
B14 Discharge current too high, speed is reduced Continue to travel carefully and avoid travelling uphill.
B15 Discharge current high Reduce your speed and avoid travelling uphill.
B16 to
B18
Battery pack voltage is too low Charge the battery pack.
B19 to
B21
Voltage in the battery pack is too high during recovery Switch the system off and then on again.
Continue to travel carefully.
C28 Joystick was deflected on start-up Do not touch the joystick when switching the system on.
C30 Gradient too big Check the horizontal installation position of the control
unit.
C31 Error: gyro sensor Unable to communicate with the sensor.
Switch system on and off; if error persists, contact your
specialist dealer.
I04 Attendant control communication error Switch the system off and then on again.
I05 Attendant control button was pressed on start-up Switch the system off and then on again.
I08,
I09
Attendant control collision protection was activated Deactivate attendant control.
Switch the system off and then on again.
M10,
M11
Check electronics, drive failure Switch the system off and then on again.
Swap the two wheels from the left to the right and from
the right to the left-hand side.
M12,
M13
Drive voltage range error Switch the system off and then on again.
Swap the two wheels from the left to the right and from
the right to the left-hand side.
If the error changes from M13 to M12: Swap the wheels
again.
M14
M15
Drive temperature range error Reduce your speed.
Let the drive cool down.
Swap the two wheels from the left to the right and from
the right to the left-hand side.
6. Warnings and error messages
6.1 Overview
In the event of a malfunction, the control unit display will show a visual error indication
on the left-hand side and an error code on the right-hand side (code M52 in the accom-
panying example).
As in some other areas, just switching the control unit off and on again can sometimes
resolve the displayed error.
The following table lists the error codes that are generally easy to resolve. If the spe-
cified remedy does not resolve the problem and the error code continues to be displayed,
please contact your specialist dealer.
If an error appears in the control unit display that is not included in the following table,
please also contact your specialist dealer.
9:30
M52
23.11.20
Couple both drives
Wheels uncoupled
CODE
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alber Esprit E34z at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alber Esprit E34z in the language / languages: English as an attachment in your email.

The manual is 7.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alber Esprit E34z

Alber Esprit E34z User Manual - German - 51 pages

Alber Esprit E34z User Manual - Dutch - 51 pages

Alber Esprit E34z User Manual - French - 51 pages

Alber Esprit E34z User Manual - Spanish - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info