785808
14
Zoom out
Zoom in
Previous page
1/41
Next page
10
2.5 Transporting and storing the wheels as vehicle luggage
The e-motion wheels must be switched off before they are removed from the wheelchair.
If the e-motion wheels have been removed from the wheelchair, they must not be
lifted or carried by the push rims [5]. This could damage the fitted sensors. Instead,
carry the e-motion wheel by its wheel rim. There is no danger of damaging the wheel
if it is handled using this part.
When setting the wheel down or aside, take care of the fins [7] and the stub axle [8]
on the rear of the wheel. Neither part should be damaged.
When transporting the wheelchair, follow the instructions of the wheelchair manufac-
turer. You might need to secure the wheelchair or certain components of it.
We recommend always removing the e-motion wheels from the wheelchair and trans-
porting them individually. The stub axle [8] should be removed from the wheels
entirely before doing so.
The wheels should be stored or transported on their backs or standing up.
During transport, the wheels must be secured properly so that they do not pose a risk
to the driver or passengers in the event of a sudden braking manoeuvre. To stop the
wheels from moving around, we recommend securing them in the vehicle using suit-
able, sturdy straps as shown in the diagram. Please note that this is a non-binding
recommendation (we accept no liability for the results of such action).
Do not attach the straps to the push rims [5]; this could damage their
sensors.
Please check whether there are specific regulations regarding the securing of wheel-
chairs and wheels for transport in your jurisdiction; if so, always adhere to these
regulations.
Alber GmbH and its representatives accept no liability for any damage resulting from
failure to comply with these instructions.
If you wish to transport your wheelchair in its entirety without dismantling the
wheels, the wheelchair must be protected in accordance with the guidelines and spe-
cifications of the wheelchair manufacturer. The diagram on the bottom left represents
just one example of a method for doing this.
2.6 Transporting the wheels by plane
For transportation by plane, the e-motion wheels can be switched off in a way that pre-
vents them from being reactivated inadvertently, e.g. by a loose item of luggage in the
aircraft’s hold. The e-motion’s “flight mode” can be used to prevent such incidents.
Activation
Press the on/off button [2] on the wheel hub down all the way and hold it down for
at least 10 seconds. All five elements of the LED display will light up for 5 seconds.
Release the on/off button [2] within 5 seconds. Carry out this procedure for both
drive wheels.
Deactivation
Press the on/off button [2] on the wheel hub down all the way and hold it down for
at least 10 seconds. All five elements of the LED display will light up for 5 seconds.
Then release the on/off button [2]. Flight mode is now deactivated. The wheels are
still switched off, but they can now be switched back on by pressing the button
again.
Note: You can also activate the flight mode for your e-motion wheels using the free
Mobility app. However, activating flight mode will sever the Bluetooth connection
between the wheels and you mobile device. As such, the on/off button [2] must be used
as described above for subsequent reactivation.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alber e-motion M25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alber e-motion M25 in the language / languages: English as an attachment in your email.

The manual is 3.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alber e-motion M25

Alber e-motion M25 User Manual - German - 39 pages

Alber e-motion M25 User Manual - Dutch - 39 pages

Alber e-motion M25 User Manual - French - 39 pages

Alber e-motion M25 User Manual - Italian - 39 pages

Alber e-motion M25 User Manual - Spanish - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info