785811
7
Zoom out
Zoom in
Previous page
1/21
Next page
4 85
4. Switching on the system
When using the control unit, the e-motion is switched over to cruise mode. Both e-motion wheels and the con-
trol unit need to be switched on for use to be possible. Carry out the following steps to this end:
Switch off all Bluetooth devices in your immediate vicinity to prevent any interference when establishing
a connection between the drive unit and the control unit.
Switch on both e-motion wheels (see the e-motion M25 operating manual). If they are in standby mode (the
middle white LED flashes briefly every 10 seconds), a connection to the control unit can be established.
Switch on the control unit (this needs to be in the mount [21]) by pressing the button [15] on it for approx.
1 second.
The LED [f] now indicates the capacity of the control unit battery in different colours (see Chapter 12.2).
If the LED [f] is flashing blue, this indicates an attempt to establish a connection to the drive unit via
Bluetooth.
If no Bluetooth connection is established within 30 seconds, the LED [f] flashes red for 10 seconds. The con-
trol unit then switches off.
If the Bluetooth connection is established between the drive unit and the control unit, the LED [f] on the
control unit continuously lights up green. See Chapter 12.2. for the meaning of the colour. The capacity of
the drive unit battery is also displayed.
If no Bluetooth connection is established after you have performed the steps listed above, this may be due to
the following reasons:
Both e-motion wheel batteries are empty
Provided the control unit still gets a connection to the wheels, either an orange warning LED (wheel batteries
low but not completely empty) or a red error LED (wheel batteries completely empty) appears depending on the
charge status, and the control unit switches off after 10 seconds. If a connection is not established, the error
LED also lights up red and the control unit switches off automatically after 10 seconds.
The control unit battery is empty
If the battery no longer has sufficient capacity, the LED [f] flashes brieflyin the display [23] when the control unit
is switched on. The system switches off completely thereafter. Charge the battery as described in Chapter 10.
23
15
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alber e-motion DuoDrive at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alber e-motion DuoDrive in the language / languages: English as an attachment in your email.

The manual is 1.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alber e-motion DuoDrive

Alber e-motion DuoDrive User Manual - German - 21 pages

Alber e-motion DuoDrive User Manual - Dutch - 21 pages

Alber e-motion DuoDrive User Manual - French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info