785798
91
Zoom out
Zoom in
Previous page
1/98
Next page
40
Optional accessories
A - Swivel arm for the control unit
To make it easier to drive up to the table edge we recommend fitting the optional swivel
arm. This enables the control unit to be swivelled out, away from its original position.
Press the cap [74] and swivel the control unit [9] completely to the side.
Swivel the control unit [9] to return it to its initial position; the cap [74] lifts up and
automatically locks the pivoting mechanism.
Turning the clamping wheel [64] clockwise releases the control unit clamp inside the
sliding part [63]. This allows the control unit to be moved slightly in longitudinal dir-
ection within the sliding part [63] if necessary.
After you have set the optimum position for you, you need to fix the control unit in
place by turning the clamping wheel [64] anticlockwise in the sliding part [63].
If the swivel arm [75] is entirely removed together with the control unit [9], you can
take it out of the holder [65]. However, first remove the plug [23] of the control unit
from the battery (see chapter 4.2).
Removing the control unit from the swivel arm
Take the plug [23] of the control unit out of the battery (see chapter 4.2).
Turn the clamping wheel [64] clockwise and slide the control unit [9] out of the slid-
ing part [63].
Attaching the control unit to the swivel arm
Slide the control unit [9] into the sliding part [63] and fix it in place by turning the
clamping wheel [64] anticlockwise.
Reconnect the plug [23] of the control unit to the battery (see chapter 5.1).
Before inserting the plug [23] into the socket [29] of the battery
pack, ensure that both parts are clean and there are no metallic
particles on them. If you detect such particles, use a dry and clean
cloth to remove them.
The control unit plug [23] is magnetic. Therefore prevent the plug
coming into contact with medical implants, electronic storage
media, bank cards or similar items.
It is necessary to ensure that the control unit is fixed in place
securely in the sliding part [63] with the clamping wheel [64]. If a
control unit falls to the ground when switched on, this can result in
an unintentional system malfunction and potentially in an accident.
The swivel arm can be fitted to virtually all wheelchair models. Your
specialist dealer can provide more detailed information.
!
i
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alber e-fix E35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alber e-fix E35 in the language / languages: English, German as an attachment in your email.

The manual is 8.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alber e-fix E35

Alber e-fix E35 User Manual - Dutch - 96 pages

Alber e-fix E35 User Manual - French - 96 pages

Alber e-fix E35 User Manual - Spanish - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info