785798
60
Zoom out
Zoom in
Previous page
1/98
Next page
89
2.4 Removing the wheels
Generally, the two e-fix wheels will remain on your wheelchair. If they need to be
removed (for example, for transport purposes), please proceed as follows:
If you have not already done so, switch off the control unit (see chapter 5.2.2).
Ensure that the wheel is engaged (see chapter 2.1).
Lift your wheelchair by its push handles.
Press the release catch [4] in the centre of the wheel hub (the coupling ring [5] must
not under any circumstances be turned at the same time) and pull the e-fix wheel
carefully from the wheelchair.
Proceed in accordance with instructions provided by the manufacturer of your anti-
tippers.
The coupling ring [5] must not under any circumstances by turned
whilst pushing the release catch [4] as this can cause damage to the
wheel. The wheel can then no longer be removed.
The e-fix wheel must be engaged to remove it from the wheelchair.
2.5 Transporting and storing the wheels as vehicle luggage
Before removing the e-fix wheels, the control unit must be switched off.
When laying the e-fix wheels down or setting them aside, take care of the stub axle
[11] and the socket [10] on the rear of the wheel. Neither part should be damaged.
To transport the wheelchair, follow the instructions of the wheelchair manufacturer.
You might need to secure the wheelchair or certain components.
We recommend always removing the e-fix wheels from the wheelchair and transporting
them individually.
The wheels should be stored or transported on their front side (on the push rims) or
standing up.
During transport, the e-fix wheels must be properly secured so that they do not pose
a risk to the driver or passengers in the event of a sudden brake manoeuvre. To secure
the wheels we recommend securing them in the vehicle with sufficiently robust straps
as shown in the diagram. Please note that this is a non-binding recommendation (we
accept no liability).
5
!
i
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alber e-fix E35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alber e-fix E35 in the language / languages: English, German as an attachment in your email.

The manual is 8.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alber e-fix E35

Alber e-fix E35 User Manual - Dutch - 96 pages

Alber e-fix E35 User Manual - French - 96 pages

Alber e-fix E35 User Manual - Spanish - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info