601589

Al-ko TCS Duotec 2500 Manual

15
Zoom out
Zoom in
Previous page
1/52
Next page
Technical data
456251_a 15
TECHNICAL DATA
Type TCS Duo-
tec 2500
TCS Duo-
tec 3000
Motor 230 V~/
50 Hz
400 V~/
50 Hz
Max. power 2500 W 2900 W
Fuse 16 A 16 A
Spped 2790 minˉ¹ 2830 minˉ¹
Combination
sitch plug
with over-
load cut-out
with over-
load cut-out
Feeder funnel for bran-
ches up to
13 mm dia
for bran-
ches up to
13 mm dia
Branch feeder for larger
branches up
to 40 mm dia
for larger
branches up
to 43 mm dia
Weight approx 51 kg approx 55 kg
Noise level
L
WA
(2000/14/EG)
115 dB(A) 115 dB(A)
Sound pres-
sure level
88 dB(A) 88 dB(A)
Uncertainty K = 2 dB(A) K = 2 dB(A)
Mass 1415 x
966 x 655
1415 x
966 x 655
SAFETY INSTRUCTIONS
Operator:
Young people under 16 years of age, and
persons who are not familiar with the instruc-
tions for use, are not allowed to use the ma-
chine.
Persons under the influence of alcohol, drugs
or medication are not allowed to use the ma-
chine.
Personal protective equipment:
Wear clothing and protective equipment in
accordance with the regulations in order to
avoid injuries to the eyes, as well as to avoid
hearing impairment.
The clothing must be appropriate (tightly fit-
ting) and must not restrict movements. If you
have long hair, it is essential to wear a hair
net.
The personal protective equipment compri-
ses:
Ear protection
Protective glasses
Work gloves
Safety shoes
Working area:
No further persons, children or animals may
be in the working area of the shredder.
Keep the working area free from material to
be shredded and other objects – danger of
stumbling.
The user of the machine is responsible for ac-
cidents involving other persons or their pro-
perty.
Ensure good lighting of the working area.
Operating times:
When operating in residential areas, observe
country-specific and communally permitted
operating times according to the regulations
on noise pollution.
Work with the machine at daylight or with
good lighting only.
Operation:
Do not reach into hopper or feed chute during
operation!
The cutting disk after-runs after the machine
is switched off!
Only start up the machine, after assembly is
fully completed.
Always perform a visible inspection prior to
using the machine. The machine must be in
a safe operating condition.
Never work alone.
Immediately renew damaged or worn parts.
Only use the machine if it is in the technical
condition stipulated by the manufacturer.
Do not undertake shredding work in the rain,
snow or stormy weather. Do not use the
shredder in wet or damp surroundings.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko TCS Duotec 2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko TCS Duotec 2500 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info