592618

Al-ko Silver 460 B-A Bio Mulchrasenmaher Manual

26
Zoom out
Zoom in
Previous page
1/400
Next page
GB
Petrol lawnmower
In it ia l s t a r tu p
A
Caution!
The equipment should not be used if the cutting
gear and/or fastenings are loose, damaged or
worn.
Carry out a visual inspection before each start-
up.
K * 1 The cam era symbol on the following page refers
to the illustrations on Page 4-7.
A d ju s tin g th e c u ttin g h eig h t
Central ad justm ent (CJ 1)
1. Press and hold the central height adjustm ent knob
(C l 1/1).
■ For shorter grass, press the central adjustment
handle downward ( O 1/2)
■ For longer grass, pull the central adjustment
handle upward ( n 1/2)
■ The central height adjustment level is indicated
(Cl
1/3)
2. Release the knob at the desired cutting height.
A x le ad justm ent or central adjustm ent ( O 2, 3)
1. To release the lever, press to the side and hold.
2. Push the lever to the left or right to select the
desired cutting height.
3. Let the lever click into position.
4. Check that all wheels are set to the same position.
Quick adju stm ent o f individ ual w heels
or axle adjustm ent
(CJ
4)
1. To release the lever, press to the side and hold.
2. Push the lever to the left or right to select the
desired cutting height.
3. Let the lever click into position.
4. Check that all wheels are set to the same position.
In d iv id u a l w h e e l a d ju s tm e n t ( a 5)
1. Loosen the wheel bolt.
2. Insert the wheel bolt in the hole corresponding to
the desired cutting height.
3. Tighten the wheel bolt.
4. Check that all wheels are set to the same position.
C e n tra l a x le a d ju s tm e n t ( c i 6)
1. Place a thumb at each end of the axle.
2. Place the fingers under the mower housing.
3. Using both thumbs, press the axle out of its present
height setting notch.
4. Using both thumbs, push the axle to the desired
height setting notch, then allow it to engage.
5. Check that all wheels are set to the same position.
Caution - R isk o f injury!
Adjust the cutting height only with the motor
switched off and when the mow er blade has
come to a standstill.
■ Always set all the wheels to the same cutting
height.
■ Cutting height adjustment depends on the
particular model.
26
Translation of original user instructions
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko Silver 460 B-A Bio Mulchrasenmaher at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko Silver 460 B-A Bio Mulchrasenmaher in the language / languages: All languages as an attachment in your email.

The manual is 7,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info