601615
12
Zoom out
Zoom in
Previous page
1/130
Next page
Log splitter
GB 1
Safety instructions
Read the operating manual and adhere to the
instructions therein at all times.
Retain the manual for later use and pass on to
the future owner in the case of resale of the unit.
Observe all safety and warning instructions on
the unit.
Technical data relating to your log splitter can be
found at the beginning of the operating manual.
Symbols
On the unit
Read the operating manual before
start-up
Ensure that other persons are
kept out of the danger zone when
starting the unit
Warning! Danger!
Keep hands away from the split-
ting wedge
Pull out the mains power plug
prior to all service and mainte-
nance work
When transporting, move the
splitting blade right down and tie
the operating levers together.
Wear protective gloves
Wear safety shoes
Wear eye protection
Warning!
Protection class criteria can only be
maintained if original insulation material
is used (in cases where repairs are
necessary) and insulation distances are
not changed.
In this operating manual
Caution!
Indicates working and operating proce-
dures that must be strictly adhered to
rule out any risk to persons.
Warning!
Contains information that must be
observed to prevent damage to the unit.
Note:
Indicates technical requirements that
should be given particular attention.
General safety instructions
Children, adolescents under 18 years of age and
persons under the influence of alcohol, drugs or
medicaments are prohibited from using the unit.
Local regulations will indicate the minimum legal
age requirements governing the user.
Accident prevention regulations must be ob-
served.
Safety measures
Only one person is permitted to operate the log
splitter.
Safety shoes, protective gloves and eye protec-
tion should be worn. A risk of injury exists ema-
nating from timber splinters.
Clothing should be practical (close fitting) and
should not hinder the wearer. A hair net must be
worn to retain long hair.
Never reach into active range of the moving
splitting wedge.
The log splitter should only be operated when it
is assembled completely and both the log splitter
and connection cable are free of damage.
Damaged protective fittings should only be re-
placed by a specialist firm or workshop.
The log splitter should only be operated with
original spare parts.
The log splitter should be disconnected from the
mains power supply for:
service work
adjustment work
transportation
brief work interruptions.
Repairs to the log splitter should only be realised
by a specialist firm or workshop.
An operationally-ready log splitter should not be
left unsupervised.
Do not operate the log splitter if uninvolved
persons are in the close vicinity.
The log splitter should not be operated in rain or
left exposed to rain or water splashes.
Translation of original user instructions
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko lhs 6000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko lhs 6000 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info