Manual Al-ko Jet 6000 5 Premium (page 16 of 172) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish, Finnish)

601995

Zoom out

Zoom in

1/172

Instructions for use

16 JET 4000 / JET 5000 / JET 6000

Cleaning the check valve

1. Removing and fitting the filter (see Section

"Cleaning the Filter").

2. Check valve (Fig. C -21) and clean under flo-

wing water.

3. Replace seal (Fig. C -22) if necessary.

4. Fit check valve.

Unscrew float body

1. Pressure line (Fig. B -11) with elbow nipple

(Fig. B -13) and connecting nipple (Fig. B -15)

2. Unscrew screw-in nipple (Fig. D -24) with seal

(Fig. D -25) . Note the fitting position of the

float body (Fig. D -26) . Pull out the float body

and clean it.

3. Replace the float body - note fitting position.

Flushing the pump

After conveying swimming pool water containing

chlorine or fluids that leave a residue the pump

must be flushed out with clear water.

Remove blockages

1. Isolate the unit from the mains and secure

against switching on again.

2. Remove the suction hose from pump inlet.

3. Connect the pressure hose to the water sup-

ply.

4. Allow water to run through the pump housing

until the blockage is removed.

5. Check that the pump is running freely by swit-

ching it on briefly.

6. Start the house water system again as descri-

bed.

STORAGE

1. Drain the suction and pressure lines.

2. Unscrew the drain screws (Fig. A -10,10A)

using the filter key and allow the water to flow

out of the pump.

3. Screw the drain screws back in place and

store the pump and accessories in a frost-free

environment.

ADVICE

If there is a risk of frost, the system must

be completely drained.

DISPOSAL

Do not dispose of old

equipment,batteries or accumulators

as householdwaste!

Product, packaging, and accessories

were made with recyclable materials, and

should be disposed of accordingly.

LED DISPLAYS

START

STOP

Normal operating mode

Switching condition LED display Function description

Push the START /STOP button. Pump

switches on and starts to draw water.

PUMP ON LED

display lights up.

FLOW CONTROL

LED display flas-

hes.

Initial commissioning: Suction and

pressure side connected, pump filled

with water, water present on suction

side. Pump connected to the mains.

Pump running. PUMP ON LED

display lights up.

Pump feeds water. Water is removed

on the pressure side.

Pushing the START/STOP button - the

pump switches off.

LED displays off. Pump off

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko Jet 6000 5 Premium in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 4,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Al-ko Jet 6000 5 Premium Manual

Product: