601523
17
Zoom out
Zoom in
Previous page
1/230
Next page
17
470519_b
HT 600, HT 700
GB
Operation
Danger – risk of injury!
The machine must not be operated before as-
sembly work has been completed!
Observe the safety instructions for operation!
Adjust the front hand grip.1.
Pull out the quick-release levera.
Move the hand grip to the desired positionb.
Push the quick-release lever back inc.
2.
Plug the power cable into the mains power
supply.
3. Grip the front hand grip with one hand, then grip
the rear hand grip with the other hand.
4. Press the switches on both hand grips (
4) –
the machine will start.
5. Keep both switches pressed while working.
6. The hedge trimmer will stop immediately if one
of the switches is released.
Work instructions
Always cut both sides of the hedge rst, before
cutting the top.
This will prevent cut material from falling into
areas that have not yet been cut.
The built-in spirit level facilitates cutting along
a straight line ( 5).
Hedges should always be cut in a trapezoid
shape. This prevents the lower branches from
becoming bare ( 8).
Repairs
Repair work may only be carried out by compe-
tent specialist workshops or our AL-KO Service
Centres.
Safety instructions for operation
Always operate the machine with both
hands.
Keep body and clothing away from cutting
parts.
Do not remove cut material while the mo-
tor is running.
When leaving unattended / transporting
the machine:
Switch the machine off.
Pull out the mains plug.
Push on the safety cover.
Never hold the machine by the blade.
Only carry the machine by the hand grip.
The domestic mains voltage must match
the mains voltage specifi cations in the
technical data.
Always use the special cable strain relief
for the extension lead.
Always keep the cable out of the cutting
area and routed away from the machine.
Assembly
The camera symbol refers to illustrations on
page 3.
Fasten the handguard to the housing using the 1.
screws provided (
1).
Pull the hand grip apart slightly and push it onto 2.
the housing (
2a). The toothing must click
into place.
Pull out the quick-release lever on the hand grip 3.
and hold it in place.(
2b)
Push the clamping bolt through the hand grip 4.
and housing and screw it into the quick-release
lever by hand. (
2c)
Screw the clamping bolt in so far that the quick-5.
release lever can be pushed against the hand
grip with little force.
Route the extension lead through the strain 6.
relief (
3).
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko HT 600 FLEXIBLE CUT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko HT 600 FLEXIBLE CUT in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info