592601

Al-ko Highline 475 VS Manual

26
Zoom out
Zoom in
Previous page
1/344
Next page
GB
Translation of original user instructions
26
Petrol lawnmower
Starting the motor
Caution - risk of poisoning!
Never leave a motor running in an enclosed
space.
Caution - Risk of injury!
Do not tilt the lawnmower while starting.
▪ Start the motor only when the blade is mounted
(thebladeactsasaywheelmass)
▪ If starting the motor when hot do NOT use the
choke or primer button
▪ Do not change the motor controller settings
Do not start the equipment if the outlet shaft is not
covered by one of the following parts:
Grass catcher
Deectorplate
Mulch kit
Be particularly careful when operating the starter
switch - follow the manufacturer's instructions
Keep your feet at a safe distance from the cutting
gear
Start the lawnmower where the grass is shorter
2. Pull in the safety brake handle on the handlebar and
hold it (
16) - the brake handle does not lock.
3. Pull out the starter cord sharply, then allow it to
slowly rewind (
17).
4. When the motor has warmed up (about 15–20
seconds), set the throttle lever to a position
between min and max.
with remote throttle control, with primer (
16)
1. Set the throttle lever to position max ( 12/1).
2. Press the primer button 3 times at intervals of about
2 seconds ( 15). If the temperature is below
10 °C, press the primer button 5 times.
3. Pull in the safety brake handle on the handlebar and
hold it (
16) - the brake handle does not lock.
4. Pull out the starter cord sharply, then allow it to
slowly rewind (
17).
5. As soon as the motor starts running, set the throttle
lever for the desired motor rpm, at a position
between min and max.
Starting manually
with remote throttle control, with choke
1. Set the throttle lever to position max
(
11/1).
2. Pull in the safety brake handle on the handlebar and
hold it (
16) – the brake handle does not lock.
3. Pull out the starter cord sharply, then allow it to
slowly rewind (
17).
4. When the motor has warmed up (about 15–20
seconds), set the throttle lever to a position
between min and max.
with remote throttle control, without primer/choke
1. Set the throttle lever to position max ( 12/1).
Starting manually
without remote throttle control, with choke
Choke
On Off
1. Set the choke at position 1 ( 13/1).
2. Pull in the safety brake handle on the handlebar and
hold it (
17) – the brake handle does not lock.
3. Pull out the starter cord sharply, then allow it to
slowly rewind (
18).
4. When the motor has warmed up (about 15–20
seconds), set the choke to position 2 (
13/2).
Motorspeed(rpmvalue)isxed.
Motor speed cannot be adjusted.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko Highline 475 VS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko Highline 475 VS in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 9,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info