601526
17
Zoom out
Zoom in
Previous page
1/68
Next page
Safety regulations
ENGLISH 5
1.5 Mains supply and extension cable
x Only extension cables approved for outdoor use with a
minimum cross-section as shown here are permissible
as mains extension cable.
- The cable connectors must be made from
rubber or must be covered in rubber.
- When using a cable reel, fully unreel all cable.
x Check whether the mains supply voltage matches the details on the type plate of the power tool.
x The mains socket must be protected at least by a 10 A - 16 A fuse.
x For your personal safety, we recommend the use of a 30 mA RCD.
1.6 Before connection to the mains supply
Before taking the power tool into use, check it fully for perfect condition.
x The ON/OFF switch must be able to move freely and must automatically return into the stop position.
x The cutters and guard must be tightly secured and in perfect condition.
x The mains cable, which is part of the equipment, and the extension cable must be in perfect condition.
Should the check reveal any irregularities or recognisable damage (also to the frame) or reduced
efficiency of the machine, do not commence work. Take the power tool to a specialised workshop and
have it checked.
1.7 Maintenance, cleaning and repairs
Only carry out those maintenance jobs and repairs, which are described in this manual. A specialised
service centre will carry our all other jobs.
x Before cleaning, maintenance or repairs, always switch OFF the motor and pull the mains supply plug
from its socket.
x For any repairs only use original parts from the manufacturer.
x Never hose down the power tool – not even for cleaning.
1.8 Working with the machine
x Only use this power tool when it is complete and in a safe condition.
x Work conscientiously, thoughtfully and calmly, and do not endanger third parties.
- Pay attention to good visibility and lighting conditions.
- Always remain within earshot of other people who can provide help in case of emergency.
- Plan for timely work breaks.
- Pay attention to possible hazards and take appropriate precautions.
- Exercise caution when the ground is wet or covered in ice and snow, on overhangs, or uneven
terrain. There is an increased risk of slipping!
- Pay attention to the risk of stumbling and obstacles, such as tree roots and stumps, edges, etc. Pay
particular attention to safety when working on slopes.
- Before commencing work, check the working area for stones, broken glass, nails, wire or other solid
objects and remove such debris to prevent them being picked up and thrown out by the cutters.
- Always hold this power tool firmly in both hands, and ensure your safe and solid foothold.
- Keep all body parts away from the blades. Always cut away from your body.
- Always cut in an efficient and correct manner (see chapter 6.2 "Correct operation of your power
hedge trimmer ").
- Never cut above shoulder height, at a distance from your body or while standing on a ladder. If
cutting at height is required, use a hydraulically operated cabin lift.
- Never touch the ground with your running hedge trimmer.
- Never use the hedge trimmer to lift away or move pieces of wood or similar materials.
- Only use the device with sharp and undamaged blades and avoid damaging the blade on foreign
objects.
x Stop the motor if the device behaves in any way unusually.
x The trimmer blade should only be touched for cleaning or to remove blockages once the blade has
stopped. Protective gloves must also be worn.
First Aid
A first aid box should always be available on-site. Immediately replace any materials you have used.
Cable length up
to
Minimum cable cross-
section
7 m 1.2 mm
2
50 m 1.6 mm
2
75 m 2.0 mm
2
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko Elektro-Heckenschere 165 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko Elektro-Heckenschere 165 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info