601527

Al-ko Elektro-Heckenschere 166 Manual

22
Zoom out
Zoom in
Previous page
1/68
Next page
Using your power hedge trimmer ; Operating and maintenance instructions
ENGLISH 10
.3 Decorative cutting
The trapezoidal cutting pattern shown prevents the
lower hedge area from loosing its foliage due to
lack of light.
Fig.10:
Firstly, cut the hedge to the desired height.
Cuttings can be freed from the hedge by a slight
pendulum action. To achieve a straight cut, a taut
piece of string is positioned in the hedge at cutting
height.
Fig.11:
Cut the hedge from below upwards into a
trapezoidal shape (to 1 m height. narrowed at the
top by approximately 10 cm). This prevents
cuttings falling onto that part of the hedge that has
not yet been cut, which may disrupt further cutting.
Slightly bevel the top edge of the hedge; then cut
back the bottom of the hedge near the ground.
To promote thick new growth on young hedges,
only cut back half of the new shoots.
If the hedge has already grown to the desired
height, young shoots can be cut back completely.
The correct time for cutting hedges is:
Leaves: June and October
Needles: April and August
Fast growing hedges: approx. every 6 weeks
from May onwards.
. Operating and maintenance instructions
The maintenance and the repair of modern
machines as well as their safety-relevant
assemblies require qualified specialised training
and a workshop equipped with special tools and
test equipment. Consequently the manufacturer
recommends that all tasks not described in these
operating instructions be carried out by a
specialised workshop. That specialist has the
required training, experience, and equipment at his
disposal, to provide you with the most cost-
effective solution for such work. He will provide
additional help in word and deed.
.1 Blade
Before hedge trimming and after cleaning, treat the
clean blade with maintenance and treatment oil.
We recommend the "Solo maintenance and
treatment oil"
Please note: Never use grease.
To clean the blade after hedge trimming, we
recommend the use of "SOLO Universal-Reiniger
(Cleaner)" After a short
period of soaking in, the ingrained remains of
cuttings on the blade are soft and solvent. They
can then be removed easily with a cloth.
Check the blade at regular intervals and when
cutters operate unusually or if the blades are
jammed. For this, the engine must be switched off
and the blade must be stopped. Clean all clippings,
brush, etc. from the cutter. Ask your local service
shop immediately to sharpen or replace the blade if
it is blunt or damaged, even if it shows only slight
cracks.
Let your service shop sharpen the blade regularly.
During this service, always clean the guide nuts
after removing the blade.
Fig. 10
Fig. 11
Fig. 12
Fig. 13
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko Elektro-Heckenschere 166 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko Elektro-Heckenschere 166 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info