601596

Al-ko BKS 4540 Manual

46
Zoom out
Zoom in
Previous page
1/480
Next page
en
Storage
46 BKS 4540
Guide bar
Reverse the bar occasionally to prevent partial
wear.
The bar rail should always be a square. Check
for wear of the bar rail. Apply a ruler to the bar
and the outside of a cutter. If a gap is observed
between them, the rail is normal. Otherwise, the
bar rail is worn. Such a bar needs to be correc-
ted or replaced.
(1) Ruler (2) Gap (3) No gap (4) Chain
tilts
WARNING!
The table contains a list of all possible combinations between bar and chain, indicating those
which may be used on each machine, marked with the symbol “*”.
Pitch Guide bar Chain Chain saw
model
Zoll Length In-
ches/cm
Groove width
Inches/mm
Code Code BKS 4540
0.325” 16”/40cm 0.058”/1.5mm Oregon
168PXBK095
Oregon
21BPX066X
*
For replacement use only above bars and chains. If you use non-approved combinations it may cause
serious personal injury and damage to the machine.
STORAGE
1 Empty the fuel tank and run the engine out of fuel.
2 Empty the oil tank.
3 Clean the entire unit.
4 Store the unit in a dry place out of the reach of children.
5 Putting the cover of the guide rail on always at storage and transportation.
WASTE DISPOSAL AND ENVIRONMENTAL PROTECTION
Never pour remainders of chain lubricant or 2-stroke fuel mixture in the drain or sewerage system or soil,
but dispose of it in a proper, environmentally friendly way, e.g., at a special collecting point or dump.
If your device should become useless somewhere in the future or you do not need it any longer, do not
dispose of the device together with your domestic refuse, but dispose of it in an environmentally friendly
manner. Thoroughly empty the oil/lubricant and fuel tanks and dispose of the remainders at a special
collecting point or dump. Please also dispose of the device itself at an according collecting/recycling
point. By doing so, plastic and metal parts can be separated and recycled. Information concerning the
disposal of materials and devices are available from your local administration.
… 46 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko BKS 4540 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko BKS 4540 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info