601596
36
Zoom out
Zoom in
Previous page
1/480
Next page
en
Fuel and chain oil
36 BKS 4540
1 Mount the guide bar then fit the saw chain around the bar and spro-
cket.
2 Fit the chain tensioner nut into the lower hole of the guide bar, then in-
stall the chain cover, and fasten the mounting nut to finger tightness.
3 While holding up the tip of the bar, adjust the chain tension by turning
the tensioner screw until the tie straps just touch the bottom side of
the bar rail.
4 Tighten the nuts securely with the bar tip held up (12 ~ 15 Nm). Then
check the chain for smooth rotation and proper tension while moving
it by hand. If necessary, readjust with the chain cover loose.
5 Tighten the tensioner screw.
(1) Loosen
(2) Tighten
(3) Chain tension adjusting screw
CAUTION!
It is very important to maintain the proper chain tension. Rapid
wear of the guide bar or the chain coming off easily can be cau-
sed by improper tension. Especially when using a new chain,
take good care of it since it should expand when first used.
The Spiked bumper belongs to the chain saw. It must be screwed
up on chain saw before the initial use. Please fix the spiked bum-
per with two screws on the forefront of the chain saw.
FUEL AND CHAIN OIL
FUEL
The engines are lubricated by oil specially formulated for air-cooled 2-
cycle gasoline engine use. If oil is not available, use an antioxidant ad-
ded quality oil expressly labeled for air-cooled 2-cycle engine use.
RECOMMENDED MIXING RATIO GASOLINE 40 : OIL 1
(JASO FC or ISO EGC grade formulated for air-cooled, two-stroke engi-
nes). These engines are certified to operate on unleaded gasoline.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko BKS 4540 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko BKS 4540 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info