601594

Al-ko BKS 4040 Manual

37
Zoom out
Zoom in
Previous page
1/448
Next page
Operation
441 076_b 37
WARNING!
Before you start the engine, make sure the saw chain is not con-
tacting anything. Make sure the chain brake always is activated
before each starting.
CHECKING OIL SUPPLY
After starting the engine, run the chain at medium speed and see if
chain oil is scattered off as shown in the figure.
The chain oil flow can be changed by inserting a screwdriver in the hole
on bottom of the clutch side. Adjust according to your work conditions.
(1) Chain oil flow adjusting shaft
Turn the shaft counter-clockwise – Flow rich,
Turn the shaft clockwise – Flow lean.
CAUTION!
The oil tank should become nearly empty by the time fuel is used
up. Be sure to refill the oil tank every time when refueling the saw.
CHECKING FUNCTIONAL OF THE CLUTCH
Before each use, you shall confirm that there is no chain movement
when the chain saw running at idling speed.
WARNING!
When running, the machine must always be firmly held in both
hands, with the left hand on the front hand-grip and the right hand
on the rear hand grip, even if the operator is left-handed.
CHAIN BRAKE
The chain brake is a device which stops the chain instantaneously if the
chain saw recoils due to kickback.
Normally, the brake is activated automatically by inertial force. It can
also be activated manually by pushing the brake lever (Front handle
guard) down toward the front. When the brake operates, a white cone
pops up from the base of the brake lever. (1) Front handle (2) Release
(3) Brake (4) Front handle guard
To release brake, pull up the front handle guard toward the front handle
till “click” sound is heard.
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko BKS 4040 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko BKS 4040 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info